Hi,
I try to find solution of the problem with the first packets in diald on
linux. I use linux 6.0, kernel 2.2.5-22, diald 16-0.16.5a-2, ppp 2.3.7-2
(I tried the diald-0.99.1-2) and masquerading. I use dynamic address. It
works properly, BUT... .The first packet (first connection queue) is routed
to virtual ip address of sl0. For two minutes i haven't responses from the
first address what I want to connect. For example : I use ping to an
address, the line is activateed but the ping hasn't any response. If i use
ping to other address, the ping has response. If I try to ping to the first
one, the response doesn't come. If i ping from other computer to the first
address, the response come. In the dctrl monitor is the first conection
queue routed via local address of sl0. I tried to change buffer timeouts,
but without success.
The configuration of diald is folowing:
accept icmp 30 any
accept tcp 120 any
device /dev/modem.0
speed 19200
lock
mode ppp
dynamic
local 192.168.1.1
remote 192.168.1.2
modem
connect /etc/ppp/pripoj
crtscts
defaultroute
fifo /etc/diald/diald.ctl
By
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
