I'm being desturbed by some sort of broadcast packets. How do I filter out the following packet's (as listed by tcpdump). Kernel filter, protocol ALL, datagram packet socket tcpdump: listening on eth0 22:01:19.428142 M 0:90:ab:f0:17:c8 > 1:0:0:0:0:0 802.1d ui/C <--similar packets removed--> 22:01:41.017205 M 0:90:ab:f0:17:c8 > 1:0:0:0:0:0 802.1d ui/C 22:01:42.869501 B arp who-has 192.168.80.213 tell login.stofanet.dk 22:01:43.000079 M 0:90:ab:f0:17:c8 > 1:0:0:0:0:0 802.1d ui/C 22:01:44.129155 B arp who-has 192.168.95.84 Type of my connection (short): My ISP is Stofanet in Denmark. It's a cable modem teknologi connected to an ethernet card in the computer. Basically this means that the computer is connected all the time having a fixed lokal 192.168.x.y address, but to get on to the outside world one has to logon/off the gateway. The logon/off part is what I need diald for, and it can be done. I tried a two computer setup with masquerade (ipchains) on the cable modem connected computer. Diald was installed on eth0 device on the second computer, far away from those nasty packets. And everything works fine, but as you might have guesed, what I really need is diald to be running on the computer connected to the cable modem. So, how do I filter those packets, and what type of data is flowing around? To me it looks like that the cable modem recieves a packet every other second, and it's not comming from my own computer. /Kim - To unsubscribe from this list: send the line "unsubscribe linux-diald" in the body of a message to [EMAIL PROTECTED]
