Try this.
#add this line to diald.conf...
addroute "/etc/ppp/defaultroute.diald"
#and create this file
######################### /etc/ppp/defaultroute.diald
#!/bin/sh
#
# <iface> <netmask> <local-ip> <remote-ip> <metric>
# echo "$@" > /tmp/defaultroute.out
if [ "$1" = "ppp0" ]; then
sleep 2
/sbin/route add default gw "$4" metric "$5" netmask "$2" dev "$1"
fi
#########################
# and make it executable...
chown root /etc/ppp/defaultroute.diald
chmod 700 /etc/ppp/defaultroute.diald
# Let me know if it works.
- Ben
On Wed, Nov 10, 1999 at 02:00:53AM +0000, Joan Moreau wrote:
> Well with 'fifo' in /etc/diald.conf, it's work.
>
> But i need to type
> route add default ppp0
> each time diald brings up ppp link.
>
> hown can i avoid that ?
>
> Thanks a lot !
>
> Joan
>
> Joan Moreau wrote:
> >
> > I've got a really big proble with diald 0.99.1 under Suse6.2
> > The connection is not giving up :
> >
> > Nov 9 23:38:12 goyave diald[659]: Trigger: udp
> > 10.0.0.1/1024 192.33.4.12/53
> > Nov 9 23:38:12 goyave diald[659]: new state CONNECT action 0x8051ed0
> > timeout 60
> > Nov 9 23:38:12 goyave diald[659]: Calling site 10.0.0.2
> > Nov 9 23:38:13 goyave diald[659]: running '/usr/sbin/chat -v -f
> > /etc/ppp/chat.script'
> > Nov 9 23:38:13 goyave diald[659]: filter accepted rule 22 proto
> > 134645032 len 63 packet 10.0.0.1,1024 => 128.8.10.90,53
> > Nov 9 23:38:13 goyave chat[663]: Can't get terminal parameters:
> > Param�tre invalide
> > Nov 9 23:38:13 goyave diald[659]: filter accepted rule 22 proto
> > 134645032 len 45 packet 10.0.0.1,1024 => 128.9.0.107,53
> > Nov 9 23:38:13 goyave diald[659]: SIGCHLD[4]: pid 663 dial, status 512
> > Nov 9 23:38:13 goyave diald[659]: Connect script failed.
> > Nov 9 23:38:13 goyave diald[659]: new state CLOSE action 0x80526f0
> > timeout -1
> > Nov 9 23:38:13 goyave diald[659]: Closing /dev/modem
> > Nov 9 23:38:14 goyave diald[659]: Delaying 30 seconds before clear to
> > dial.
> > N
> >
> > my etc/diald.conf is
> > mode ppp
> > connect "/usr/sbin/chat -v -f /etc/ppp/chat.script"
> > device /dev/modem
> > speed 115200
> > modem
> > defaultroute
> > lock
> > crtscts
> > dynamic
> > local 10.0.0.1
> > remote 10.0.0.2
> > debug 31
> > include /usr/lib/diald/standard.filter
> >
> > while my chat.script is
> > REPORT CONNECT
> > ABORT 'ERROR'
> > ABORT 'BUSY'
> > ABORT 'NO CARRIER'
> > ABORT 'NO DIALTONE'
> > '' ATZ OK AT&F1 OK ATDTXXXXXXXXXXX CONNECT ''
> > ogin: XXXXXXXXXX
> > ssword: XXXXXXXXXX
> >
> > (route -n is :
> > root@goyave:~ > route -n
> > Kernel IP routing table
> > Destination Gateway Genmask Flags Metric Ref Use
> > Iface
> > 192.168.1.1 0.0.0.0 255.255.255.255 UH 1 0 0
> > dummy
> > 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0
> > eth0
> > 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
> > lo
> > )
> > can you help me ??
> >
> > Thanks a lot
> >
> > Joan Moreau
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> > the body of a message to [EMAIL PROTECTED]
>
> --
> Joan Moreau
> [EMAIL PROTECTED]
> http://www.multimania.com/grosjo/
> http://www.polytechnique.org/
> ICQ 42001201
>
> "La phrase la plus excitante qu'on peut entendre dans le domaine de la
> recherche qui annonce une grande nouvelle, ce n'est pas 'Eureka!',
> mais plut�t 'Tiens, c'est marrant....'" --Isaac Asimov
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
--
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
