Bob,
Why would I want to get rid of gpm? I'm running RH6.1 and diald 0.99.4.
I got it now to
where it dials and brings up the link but I'm having problems with my
route and logging
in to the server.
This is my pppd-options line
pppd-options user striker pass 187187 noauth ipcp-accept-local
ipcp-accept-remote
is that correct? I'm dialing into a windows nt server.
Thanks,
Brad
Bob Chiodini wrote:
> Brad,
>
> The ppp options may be in a file called /etc/ppp/options. The diald
documentation
> recommends that you specify your ppp options in the diald.conf file.
It looks like
> you have that covered.
>
> I think the problem may be in your connect script. I've attached my
config file and
> connect info as an example. I recommend that you start with a simple
config and
> expand when that is working.
>
> If you're running RedHat: To stop gpm from coming up when you reboot
run the
> following:
>
> chkconfig --del gpm
>
> It might work for other distributions.
>
> BTW: ls -l /dev/mouse to find out where /dev/mouse is linked.
>
> Bob...
>
> Brad Davis wrote:
>
> > Bob,
> >
> > I don't know how to check the link associated with /dev/mouse so I
skipped that so
> > I did the other thing. This bawx is acting as a gateway for my home
network and is
> > accessible via telnet only until I get another monitor. I killed
gpm. I don't know
> > where the ppp.options file is. I will include my diald.conf file.
The modem isn't
> > dialing and I endup killing diald after a while cause it didn't
work. I also think
> > that it is calling the wrong ip. I have 3 computers on my network
192.168.1.1(the
> > server with diald), 192.168.1.2, and 192.168.1.3. I copied this out
before I killed
> > diald.
> >
> > // Begin /var/log/messages
> >
> > Apr 30 14:16:35 localhost pppd[581]: Terminating on signal 15.
> > Apr 30 14:16:35 localhost pppd[581]: Connection terminated.
> > Apr 30 14:16:35 localhost pppd[581]: Connect time 18.1 minutes.
> > Apr 30 14:16:35 localhost pppd[581]: Sent 140563 bytes, received
261384 bytes.
> > Apr 30 14:16:35 localhost pppd[581]: Exit.
> > Apr 30 14:21:15 localhost diald[701]: Unknown option
'ipcp-max-terminate'
> > Apr 30 14:21:15 localhost diald[701]: Unknown option 'reroute'
> > Apr 30 14:21:15 localhost diald[702]: Using fifo
/etc/diald/diald.ctl
> > Apr 30 14:21:15 localhost modprobe: can't locate module tap0
> > Apr 30 14:21:15 localhost modprobe: can't locate module tap1
> > Apr 30 14:21:16 localhost modprobe: can't locate module tap2
> > Apr 30 14:21:16 localhost modprobe: can't locate module tap3
> > Apr 30 14:21:16 localhost modprobe: can't locate module tap4
> > Apr 30 14:21:17 localhost modprobe: can't locate module tap5
> > Apr 30 14:21:17 localhost modprobe: can't locate module tap6
> > Apr 30 14:21:17 localhost modprobe: can't locate module tap7
> > Apr 30 14:21:17 localhost modprobe: can't locate module tap8
> > Apr 30 14:21:18 localhost modprobe: can't locate module tap9
> > Apr 30 14:21:18 localhost modprobe: can't locate module tap10
> > Apr 30 14:21:18 localhost modprobe: can't locate module tap11
> > Apr 30 14:21:19 localhost modprobe: can't locate module tap12
> > Apr 30 14:21:19 localhost modprobe: can't locate module tap13
> > Apr 30 14:21:19 localhost modprobe: can't locate module tap14
> > Apr 30 14:21:19 localhost modprobe: can't locate module tap15
> > Apr 30 14:21:20 localhost kernel: SLIP: version
0.8.4-NET3.019-NEWTTY-MODULAR
> > (dynamic channels, max=256) (6 bit encapsulation enabled).
> > Apr 30 14:21:20 localhost kernel: SLIP linefill/keepalive option.
> > Apr 30 14:21:20 localhost diald[702]: Proxy device established on
interface sl0
> > Apr 30 14:21:20 localhost diald[702]: start sl0: SIOCSIFMETRIC:
Operation not
> > supported
> > Apr 30 14:21:20 localhost diald[702]: start sl0: SIOCDELRT: No such
process
> > Apr 30 14:21:20 localhost diald[702]: Diald initial setup completed.
> > Apr 30 14:21:21 localhost diald[702]: Trigger: udp
192.168.0.1/61040
> > 207.66.2.66/53
> > Apr 30 14:21:21 localhost diald[702]: Calling site 192.168.0.2
> > Apr 30 14:22:08 localhost diald[702]: Connect script failed.
> > Apr 30 14:22:08 localhost diald[702]: Closing /dev/modem
> > Apr 30 14:22:09 localhost diald[702]: Delaying 1 seconds before
clear to dial.
> > Apr 30 14:22:26 localhost diald[702]: Trigger: tcp
192.168.0.1/1025
> > 207.66.2.68/21
> > Apr 30 14:22:26 localhost diald[702]: Calling site 192.168.0.2
> > Apr 30 14:23:12 localhost diald[702]: Connect script failed.
> > Apr 30 14:23:12 localhost diald[702]: Closing /dev/modem
> > Apr 30 14:23:13 localhost diald[702]: Delaying 1 seconds before
clear to dial.
> >
> > // End /var/log/messages
> > // Begin /etc/diald/diald.conf
> >
> > debug 0x0008
> > pppd-options user striker noauth ipcp-accept-local
ipcp-accept-remote
> > #ipcp-max-terminate 10 noipdefault mode ppp
> > include /etc/diald/standard.filter
> > redial-timeout 1
> > fifo /etc/diald/diald.ctl
> > device /dev/ttyS1
> > speed 115200
> > modem
> > lock
> > crtscts
> > connect "/etc/sysconfig/network-scripts/chat-ppp0"
> > local
> > remote
> > dynamic
> > defaultroute
> > reroute
> > netmask 255.255.255.0
> > accounting-log /var/log/diald.log
> > mode ppp
> > two-way
> > connect-timeout 120
> > start-pppd-timeout 120
> > died-retry-count 0
> > redial-backoff-start 4
> > redial-backoff-limit 300
> > dial-fail-limit 10
> >
> > // End /etc/diald/diald.conf
> >
> > Thanks,
> > Brad
> >
> > Bob Chiodini wrote:
> >
> > > Brad,
> > >
> > > Check the link associated with /dev/mouse. Last resort, if you
strictly use X
> > > windows (even if not) then kill gpm. Then bring up diald. This
should clean up
> > > the log and maybe reveal what is really happening.
> > >
> > > If neither of these work, post your diald.conf and ppp.options
files.
> > >
> > > You cannot directly run ifup ppp0 as your connect script as it
attempts to start
> > > pppd, diald wants to do that.
> > >
> > > This is interesting, did you kill diald by hand after 26 seconds.
Did the modem
> > > dial?
> > >
> > > Apr 27 19:17:56 localhost diald[4764]: Trigger: udp
> > > 192.168.0.1/1024 207.66.2.66/53
> > > Apr 27 19:17:56 localhost diald[4764]: Calling site 192.168.0.2
> > > Apr 27 19:17:56 localhost gpm[426]: Error in read()ing first: No
such file or
> > > directory
> > > Apr 27 19:18:22 localhost last message repeated 39338 times
> > > Apr 27 19:18:22 localhost diald[4764]: SIGTERM. Termination
request received.
> > > Apr 27 19:18:22 localhost diald[4764]: Diald is dieing with code 0
> > > Apr 27 19:18:22 localhost chat[4791]: SIGINT
> > > Apr 27 19:18:22 localhost diald[4764]: Closing /dev/modem
> > >
> > > Bob...
> > >
>
> --
> ---------------------------------------------------------
> Bob Chiodini [EMAIL PROTECTED]
> ---------------------------------------------------------
>
>
------------------------------------------------------------------------
> #
> # diald.conf for anathoth
> #
> # Select the demand dial rules you want
> # Bring the link up for anything, timeout in seconds. Use this for
> # when the dompute has its own phone line
> ignore tcp tcp.fin
> accept any 300 any
> # Use the filter file that comes with diald. This can be a bit
drastic,
> # so use the filter below
> # include /usr/lib/diald/standard.filter
> # or use the filter that brings the link up for use on a line shared
with
> # a phone
> # include /etc/diald/phone.filter
>
> # stuff to set up the diald connection
> device /dev/ttyS1
> speed 115200
> lock
> mode ppp
> # We may get another terminal server, thus use
> # 'dynamic' and do not tell PPP the IP number of the other end
> # For use with gated, comment out the 'dynamic' option, and
> # set remote to be the same as local
> dynamic
> local 10.0.0.1
> remote 10.0.0.2
> netmask 255.255.255.252
> pppd-options asyncmap 0 user !bchiodini remotename gnc
> # ipcp-accept-remote
> # impulse 300,0,0
> defaultroute
> modem
> crtscts
> connect "/usr/sbin/chat -f /etc/ppp/pppchat -r
/etc/ppp/connect-errors"
> redial-timeout 10
> fifo /etc/diald/gnc.ctl
> ip-up /etc/diald/ipup.gnc
> # addroute /etc/diald/add.default.route
> # >> /tmp/netmail.log 2>&1"
> # restrict 9:00:00 17:45:00 1 * *
> # or-restrict 9:00:00 17:45:00 2 * *
> # or-restrict 9:00:00 17:45:00 3 * *
> # or-restrict 9:00:00 17:45:00 4 * *
> # or-restrict 9:00:00 17:45:00 5 * *
> # up
>
>
------------------------------------------------------------------------
> ABORT "NO DIALTONE"
> ABORT BUSY
> ABORT "NO CARRIER"
> REPORT "CONNECT"
> "" ATZ
> OK AT&F&C1E0s11=55L0M0S95=1X4W1&Q5&D3
> OK ATDT6381198
> CONNECT ""
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
