Hi,
Another thing to watch out for: my ISDN TA by default does some automatic
PAP/CHAP conversion magic, presumably to help a lesser OS that can't handle
CHAP; as a result my linux box would fail to connect to BT Internet (a
British ISP, which requires CHAP) until I disabled this feature.
I have a ZyXel Omni.net Plus ISDN TA, I don't know if this feature is
standard for other TAs?
Chris
--
Chris Smith
Work: [EMAIL PROTECTED]
Home: [EMAIL PROTECTED]
Sarchasm: The gulf between the author of sarcastic wit and the person
who doesn't get it
-----Original Message-----
From: Hoo Kok Mun [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 04, 2000 5:34 PM
To: [EMAIL PROTECTED]
Subject: Upgrade to ISDN
Hi there,
I have been using diald with modems with no problem since version 0.16.5
then 0.99.2 then 0.99.4.
I am using slackware 7.0 kernel v.2.2.13
However, due to the slow access speed, I decided to change to ISDN access
using EICON DIVA T/A Modem
I tried my luck to change the modem and nothing else. Of course it didn't
work.
Anyone have a similar setup before? Converting from a analog to ISDN dialup?
I searched all over the WEB and found a lot of links to ISDN but I tried
some of them and it's not working.
Know any good how-to/write-up/tutorial on ISDN with diald?
I used minicom and try to connect manually, it stops after the ''CONNECT"
string.
I tried diald, it says connect script failed.
I used the manual pppd (the default ppp-go and ppp-off) and here is my log.
my messages log
May 4 21:20:38 mail pppd[599]: pppd 2.3.10 started by root, uid 0
May 4 21:20:39 mail chat[600]: timeout set to 60 seconds
May 4 21:20:39 mail chat[600]: abort on (ERROR)
May 4 21:20:39 mail chat[600]: abort on (BUSY)
May 4 21:20:39 mail chat[600]: abort on (NO CARRIER)
May 4 21:20:39 mail chat[600]: abort on (NO DIALTONE)
May 4 21:20:39 mail chat[600]: send (AT&FH0^M)
May 4 21:20:39 mail chat[600]: expect (OK)
May 4 21:20:39 mail chat[600]: AT&FH0^M^M
May 4 21:20:39 mail chat[600]: OK
May 4 21:20:39 mail chat[600]: -- got it
May 4 21:20:39 mail chat[600]: send (atdtXXXXXXXX^M)
May 4 21:20:39 mail chat[600]: timeout set to 75 seconds
May 4 21:20:39 mail chat[600]: expect (CONNECT)
May 4 21:20:39 mail chat[600]: ^M
May 4 21:20:41 mail chat[600]: atdtxxxxxxxx^M^M
May 4 21:20:41 mail chat[600]: CONNECT
May 4 21:20:41 mail chat[600]: -- got it
May 4 21:20:41 mail chat[600]: send (ogin:^M)
May 4 21:20:41 mail chat[600]: expect (myusername)
May 4 21:20:41 mail chat[600]: 115200^M
Any clue?
Thanks in advance...
***************************************************************
"What you get by achieving your goals is not as
important as what you become by achieving your goals."
Email : [EMAIL PROTECTED]
Home Page : http://home.pacific.net.sg/~hkmun
***************************************************************
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
