On Wed, May 03, 2017 at 12:40:08PM +1200, Chris Packham wrote:
> By default adt7475 will stop the fans (pwm duty cycle 0%) when the
> temperature drops past Tmin - hysteresis. Some systems want to keep the
> fans moving even when the temperature drops so add new sysfs attributes
> that configure the enhanced acoustics min 1-3 which allows the fans to
> run at the minimum configure pwm duty cycle.
>
> Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - use pwmN_stall_dis as the attribute name. I think this describes the purpose
> pretty well. I went with a new attribute instead of overloading
> pwmN_auto_point1_pwm so this doesn't affect existing users.
>
> Documentation/hwmon/adt7475 | 5 +++++
> drivers/hwmon/adt7475.c | 50
> +++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 55 insertions(+)
>
> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
> index 0502f2b464e1..63507402cd4f 100644
> --- a/Documentation/hwmon/adt7475
> +++ b/Documentation/hwmon/adt7475
> @@ -109,6 +109,11 @@ fan speed) is applied. PWM values range from 0 (off) to
> 255 (full speed).
> Fan speed may be set to maximum when the temperature sensor associated with
> the PWM control exceeds temp#_max.
>
> +At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at
> the
> +minimum (i.e. auto_point1_pwm). This behaviour be configured using the
> +pwm[1-*]_stall_dis sysfs attribute. A value of 0 means the fans will shut
> off.
That is really an awkward attribute name. I'll have to think about this some
more.
Guenter
> +A value of 1 means the fans will run at auto_point1_pwm.
> +
> Notes
> -----
>
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index ec0c43fbcdce..85957324cd85 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -79,6 +79,9 @@
>
> #define REG_TEMP_TRANGE_BASE 0x5F
>
> +#define REG_ENHANCE_ACOUSTICS1 0x62
> +#define REG_ENHANCE_ACOUSTICS2 0x63
> +
> #define REG_PWM_MIN_BASE 0x64
>
> #define REG_TEMP_TMIN_BASE 0x67
> @@ -209,6 +212,7 @@ struct adt7475_data {
> u8 range[3];
> u8 pwmctl[3];
> u8 pwmchan[3];
> + u8 enh_acou[2];
>
> u8 vid;
> u8 vrm;
> @@ -700,6 +704,43 @@ static ssize_t set_pwm(struct device *dev, struct
> device_attribute *attr,
> data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
> i2c_smbus_write_byte_data(client, reg,
> data->pwm[sattr->nr][sattr->index]);
> + mutex_unlock(&data->lock);
> +
> + return count;
> +}
> +
> +
> +static ssize_t show_stall_dis(struct device *dev, struct device_attribute
> *attr,
> + char *buf)
> +{
> + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> + struct i2c_client *client = to_i2c_client(dev);
> + struct adt7475_data *data = i2c_get_clientdata(client);
> + u8 mask = BIT(5 + sattr->index);
> +
> + return sprintf(buf, "%d\n", !!(data->enh_acou[0] & mask));
> +}
> +
> +static ssize_t set_stall_dis(struct device *dev, struct device_attribute
> *attr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> + struct i2c_client *client = to_i2c_client(dev);
> + struct adt7475_data *data = i2c_get_clientdata(client);
> + long val;
> + u8 mask = BIT(5 + sattr->index);
> +
> + if (kstrtol(buf, 10, &val))
> + return -EINVAL;
> +
> + mutex_lock(&data->lock);
> +
> + data->enh_acou[0] &= ~mask;
> + if (val)
> + data->enh_acou[0] |= mask;
> +
> + i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1,
> + data->enh_acou[0]);
>
> mutex_unlock(&data->lock);
>
> @@ -1028,6 +1069,8 @@ static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm,
> S_IRUGO | S_IWUSR, show_pwm,
> set_pwm, MIN, 0);
> static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
> show_pwm,
> set_pwm, MAX, 0);
> +static SENSOR_DEVICE_ATTR_2(pwm1_stall_dis, S_IRUGO | S_IWUSR,
> show_stall_dis,
> + set_stall_dis, 0, 0);
> static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm,
> INPUT,
> 1);
> static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
> @@ -1040,6 +1083,8 @@ static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm,
> S_IRUGO | S_IWUSR, show_pwm,
> set_pwm, MIN, 1);
> static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
> show_pwm,
> set_pwm, MAX, 1);
> +static SENSOR_DEVICE_ATTR_2(pwm2_stall_dis, S_IRUGO | S_IWUSR,
> show_stall_dis,
> + set_stall_dis, 0, 1);
> static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm,
> INPUT,
> 2);
> static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
> @@ -1052,6 +1097,8 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm,
> S_IRUGO | S_IWUSR, show_pwm,
> set_pwm, MIN, 2);
> static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR,
> show_pwm,
> set_pwm, MAX, 2);
> +static SENSOR_DEVICE_ATTR_2(pwm3_stall_dis, S_IRUGO | S_IWUSR,
> show_stall_dis,
> + set_stall_dis, 0, 2);
>
> /* Non-standard name, might need revisiting */
> static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit);
> @@ -1112,12 +1159,14 @@ static struct attribute *adt7475_attrs[] = {
> &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
> &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
> &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_stall_dis.dev_attr.attr,
> &sensor_dev_attr_pwm3.dev_attr.attr,
> &sensor_dev_attr_pwm3_freq.dev_attr.attr,
> &sensor_dev_attr_pwm3_enable.dev_attr.attr,
> &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
> &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
> &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm3_stall_dis.dev_attr.attr,
> &dev_attr_pwm_use_point2_pwm_at_crit.attr,
> NULL,
> };
> @@ -1136,6 +1185,7 @@ static struct attribute *pwm2_attrs[] = {
> &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
> &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
> &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_stall_dis.dev_attr.attr,
> NULL
> };
>
> --
> 2.11.0.24.ge6920cf
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
