Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra72-evm-revc.dts.

Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
 arch/arm/boot/dts/dra72-evm-revc.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts 
b/arch/arm/boot/dts/dra72-evm-revc.dts
index 40a399735533..b2f1eedcf60d 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
@@ -94,9 +95,22 @@
 };
 
 &mmc1 {
+       pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", 
"sdr104";
+       pinctrl-0 = <&mmc1_pins_default>;
+       pinctrl-1 = <&mmc1_pins_hs>;
+       pinctrl-2 = <&mmc1_pins_sdr12>;
+       pinctrl-3 = <&mmc1_pins_sdr25>;
+       pinctrl-4 = <&mmc1_pins_sdr50>;
+       pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+       pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
        vmmc_aux-supply = <&ldo1_reg>;
 };
 
 &mmc2 {
+       pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+       pinctrl-0 = <&mmc2_pins_default>;
+       pinctrl-1 = <&mmc2_pins_hs>;
+       pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+       pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
        vmmc-supply = <&evm_1v8_sw>;
 };
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to