Update documentation on how to enable ixgb and ixgb DCB. Simply remove NETDEV_10000 and replace it with the new used kconfig names.
Signed-off-by: Corentin Labbe <[email protected]> --- Documentation/networking/ixgb.txt | 3 ++- Documentation/networking/ixgbe.txt | 7 ++++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt index 09f71d71920a..b10f360c57d4 100644 --- a/Documentation/networking/ixgb.txt +++ b/Documentation/networking/ixgb.txt @@ -70,7 +70,8 @@ select m for "Intel(R) PRO/10GbE support" located at: Location: -> Device Drivers -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) + -> Ethernet driver support (ETHERNET [=y]) + -> Intel devices (NET_VENDOR_INTEL [=y]) 1. make modules && make modules_install 2. Load the module: diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt index 687835415707..90a3860cca3d 100644 --- a/Documentation/networking/ixgbe.txt +++ b/Documentation/networking/ixgbe.txt @@ -253,9 +253,10 @@ Additional Configurations -> Device Drivers -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) - -> Intel(R) 10GbE PCI Express adapters support - -> Data Center Bridging (DCB) Support + -> Ethernet driver (ETHERNET [=y]) + -> Intel devices (NET_VENDOR_INTEL [=y]) + -> Intel(R) 10GbE PCI Express adapters support (IXGBE [=y]) + -> Data Center Bridging (DCB) Support (IXGBE_DCB [=y]) After these options are selected, you must rebuild your kernel and your modules. -- 2.13.6 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
