Hi Boris,
On Mon, Mar 26, 2018 at 1:25 PM, Boris Brezillon
<boris.brezil...@bootlin.com> wrote:
> On Mon, 26 Mar 2018 12:12:54 +0200
> Geert Uytterhoeven <ge...@linux-m68k.org> wrote:
>> On Fri, Mar 23, 2018 at 12:00 PM, Boris Brezillon
>> <boris.brezil...@bootlin.com> wrote:
>> > Document the Cadence I3C gpio expander bindings.
>> >
>> > Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
>>
>> Thanks for your patch!
>>
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
>>
>> > +- #interrupt-cells : Should be 2. The first cell is the GPIO number.
>> > + The second cell bits[3:0] is used to specify trigger type and level
>> > flags:
>> > + 1 = low-to-high edge triggered.
>> > + 2 = high-to-low edge triggered.
>> > + 3 = triggered on both edges.
>> > + 4 = active high level-sensitive.
>> > + 8 = active low level-sensitive.
>>
>> These are identical to the values in
>> <dt-bindings/interrupt-controller/irq.h>.
>> Perhaps you can refer to those definitions?
>
> Well, I'm not sure this is allowed since DT bindings docs are
> supposed to be OS-agnostic and macros defined in
> <dt-bindings/interrupt-controller/irq.h> are, AFAIK, only available to
> Linux.
If they're under include/dt-bindings/, they're part of the DT bindings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
