This patch adds support for new flash which indicates that trip point triggers irq when temperature is met. Exynos5433 supports 8 trip point which will trigger irq. Above that number other trip points should be registered without 'irq-mode' flag. That will force the thermal framework to start polling the temperature sensor under configured conditions and handle the trip point.
Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lukasz Luba <[email protected]> --- arch/arm/boot/dts/exynos5410-odroidxu.dts | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index a2046f5..c255466 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -121,22 +121,26 @@ cpu_alert0: cpu-alert-0 { temperature = <50000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ - type = "active"; + type = "passive"; + irq-mode; }; cpu_alert1: cpu-alert-1 { temperature = <60000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ - type = "active"; + type = "passive"; + irq-mode; }; cpu_alert2: cpu-alert-2 { temperature = <70000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ - type = "active"; + type = "passive"; + irq-mode; }; cpu_crit0: cpu-crit-0 { temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; + irq-mode; }; }; -- 2.7.4
