Version five of the driver for Texas Instruments TMP512/513 sensors.
Thanks again for the review.
Main changes from version 4:
- Remove config_lock mutex
- Rewrite dt-bindings in yaml
Main changes from version 3:
- Remove tmp51x_config structure, there was no useful static
field in the structure. The data was moved to tmp51x_data
structure.
- Remove platform data
- use device_ API instead of of_device API
- Use array for n-Factor values.
- Set shunt default value to 1000 uOhms
Main changes from version 2:
- Remove the neccessity to provide a shunt-resistor value
- Remove max-expected-current-ma configuration and always
use max possible current for calibration
- Make sure calculation during calibration can't overflow
- Add value clamping for DT value and runtime parameters
- Support non DT system
- Move hysteresis from DT to standard attribute
Main changes from version 1:
- Use the with_info API instead of sysfs attributes.
- Remove non-standard attributes and raw value.
- Move settings that were non-standard attributes to
device tree, update documentation as well.
- Fix coding style issues
Eric Tremblay (2):
dt-bindings: hwmon: Add TMP512/513
hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.
.../devicetree/bindings/hwmon/ti,tmp513.yaml | 90 ++
Documentation/hwmon/tmp513.rst | 102 +++
MAINTAINERS | 7 +
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/tmp513.c | 786 ++++++++++++++++++
6 files changed, 996 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
create mode 100644 Documentation/hwmon/tmp513.rst
create mode 100644 drivers/hwmon/tmp513.c
--
2.17.1
