Hi Jason,
On 5/6/2025 5:31 PM, Jason Gunthorpe wrote:
> On Tue, May 06, 2025 at 02:45:00PM +0530, Vasant Hegde wrote:
>>> +/**
>>> + * struct iommu_vqueue_alloc - ioctl(IOMMU_VQUEUE_ALLOC)
>>> + * @size: sizeof(struct iommu_vqueue_alloc)
>>> + * @flags: Must be 0
>>> + * @viommu_id: Virtual IOMMU ID to associate the virtual queue with
>>> + * @type: One of enum iommu_vqueue_type
>>> + * @index: The logical index to the virtual queue per virtual IOMMU, for a
>>> multi
>>> + * queue model
>>> + * @out_vqueue_id: The ID of the new virtual queue
>>> + * @addr: Base address of the queue memory in the guest physical address
>>> space
>>> + * @length: Length of the queue memory in the guest physical address space
>>> + *
>>> + * Allocate a virtual queue object for a vIOMMU-specific HW-acceleration
>>> feature
>>> + * that allows HW to access a guest queue memory described by @addr and
>>> @length.
>>> + * It's suggested for VMM to back the queue memory using a single huge
>>> page with
>>> + * a proper alignment for its contiguity in the host physical address
>>> space. The
>>> + * call will fail, if the queue memory is not contiguous in the physical
>>> address
>>> + * space. Upon success, its underlying physical pages will be pinned to
>>> prevent
>>> + * VMM from unmapping them in the IOAS, until the virtual queue gets
>>> destroyed.
>>> + *
>>> + * A vIOMMU can allocate multiple queues, but it must use a different
>>> @index to
>>> + * separate each allocation, e.g. VCMDQ0, VCMDQ1, ...
>>
>> This will handle multiple queues. But AMD vIOMMU needs to comunicate certain
>> control bit setting which is not related to buffers like "Completion wait
>> interrupt".
>>
>> How do we handle that? extend iommu_queue_alloc() or have different
>> interface?
>
> Do you need a modify queue operation?
We have two types of operations. One that impacts the queue, other set of bits
which doesn't operate on qeueue.
ex: Event log buffer
- We configure "MMIO Offset 0010h Event Log Base Address Register" with Base
address and size
- MMIO Offset 0018h IOMMU Control Register
EventLogEn: Event log enable
* When guest sets this bit, qemu will trap and will send queue_alloc
* When guest disables this bit, qemu will trap and send vqueue_destroy
This part is fine.
EventIntEn: Event log interrupt enable
* When guest sets this bit, qemu will trap
* this needs to be communicated to Host so that we can program VF Control
BAR and enable the interrupt
- There is other bit "Completion wait interrupt enable"
This doesn't related to any buffer. Instead if we configure this for
completion wait command it will generate interrupt.
I am asking how do we handle above two steps? Should it be part of queue IOCTL
or may be some other IOCTL which just passes these info to HW driver?
-Vasant
