Hi Jakub,
Should I drop this selftest as it needs the new iproute2 feature that has
not applied yet?
Thanks
Hangbin
On Thu, Jul 24, 2025 at 08:16:32AM +0000, Hangbin Liu wrote:
> Add a selftest to verify that per-port actor priority (ad_actor_port_prio)
> is correctly applied and affects aggregator selection as expected.
>
> Move cmd_jq from forwarding/lib.sh to net/lib.sh.
>
> Signed-off-by: Hangbin Liu <liuhang...@gmail.com>
> ---
> .../selftests/drivers/net/bonding/Makefile | 3 +-
> .../drivers/net/bonding/bond_lacp_prio.sh | 73 +++++++++++++++++++
> tools/testing/selftests/net/forwarding/lib.sh | 24 ------
> tools/testing/selftests/net/lib.sh | 24 ++++++
> 4 files changed, 99 insertions(+), 25 deletions(-)
> create mode 100755
> tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
>
> diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile
> b/tools/testing/selftests/drivers/net/bonding/Makefile
> index 2b10854e4b1e..32617a834a6b 100644
> --- a/tools/testing/selftests/drivers/net/bonding/Makefile
> +++ b/tools/testing/selftests/drivers/net/bonding/Makefile
> @@ -10,7 +10,8 @@ TEST_PROGS := \
> mode-2-recovery-updelay.sh \
> bond_options.sh \
> bond-eth-type-change.sh \
> - bond_macvlan_ipvlan.sh
> + bond_macvlan_ipvlan.sh \
> + bond_lacp_prio.sh
>
> TEST_FILES := \
> lag_lib.sh \
> diff --git a/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
> b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
> new file mode 100755
> index 000000000000..a3f939d12143
> --- /dev/null
> +++ b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
> @@ -0,0 +1,73 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Testing if bond lacp per port priority works
> +
> +lib_dir=$(dirname "$0")
> +# shellcheck disable=SC1091
> +source "$lib_dir"/../../../net/lib.sh
> +
> +# create client, switch, backup switch netns
> +setup_ns c_ns s_ns b_ns
> +defer cleanup_all_ns
> +
> +# setup links
> +# shellcheck disable=SC2154
> +ip -n "${c_ns}" link add eth0 type veth peer name eth0 netns "${s_ns}"
> +ip -n "${c_ns}" link add eth1 type veth peer name eth1 netns "${s_ns}"
> +# shellcheck disable=SC2154
> +ip -n "${c_ns}" link add eth2 type veth peer name eth0 netns "${b_ns}"
> +ip -n "${c_ns}" link add eth3 type veth peer name eth1 netns "${b_ns}"
> +
> +ip -n "${c_ns}" link add bond0 type bond mode 802.3ad miimon 100 lacp_rate
> fast ad_select prio
> +ip -n "${s_ns}" link add bond0 type bond mode 802.3ad miimon 100 lacp_rate
> fast
> +ip -n "${b_ns}" link add bond0 type bond mode 802.3ad miimon 100 lacp_rate
> fast
> +
> +ip -n "${c_ns}" link set eth0 master bond0
> +ip -n "${c_ns}" link set eth1 master bond0
> +ip -n "${c_ns}" link set eth2 master bond0
> +ip -n "${c_ns}" link set eth3 master bond0
> +ip -n "${s_ns}" link set eth0 master bond0
> +ip -n "${s_ns}" link set eth1 master bond0
> +ip -n "${b_ns}" link set eth0 master bond0
> +ip -n "${b_ns}" link set eth1 master bond0
> +
> +ip -n "${c_ns}" link set bond0 up
> +ip -n "${s_ns}" link set bond0 up
> +ip -n "${b_ns}" link set bond0 up
> +
> +# set ad actor port priority, default 255
> +ip -n "${c_ns}" link set eth0 type bond_slave ad_actor_port_prio 1000
> +prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth0"
> ".[].linkinfo.info_slave_data.ad_actor_port_prio")
> +[ "$prio" -ne 1000 ] && RET=1
> +ip -n "${c_ns}" link set eth2 type bond_slave ad_actor_port_prio 10
> +prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth2"
> ".[].linkinfo.info_slave_data.ad_actor_port_prio")
> +[ "$prio" -ne 10 ] && RET=1
> +log_test "bond 802.3ad" "ad_actor_port_prio setting"
> +
> +# Trigger link state change to reselect the aggregator
> +ip -n "${c_ns}" link set eth1 down
> +ip -n "${c_ns}" link set eth1 up
> +# the active agg should be connect to switch
> +bond_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show bond0"
> ".[].linkinfo.info_data.ad_info.aggregator")
> +eth0_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show eth0"
> ".[].linkinfo.info_slave_data.ad_aggregator_id")
> +if [ "${bond_agg_id}" -ne "${eth0_agg_id}" ]; then
> + RET=1
> +fi
> +
> +# Change the actor port prio and re-test
> +ip -n "${c_ns}" link set eth0 type bond_slave ad_actor_port_prio 10
> +ip -n "${c_ns}" link set eth2 type bond_slave ad_actor_port_prio 1000
> +# Trigger link state change to reselect the aggregator
> +ip -n "${c_ns}" link set eth1 down
> +ip -n "${c_ns}" link set eth1 up
> +# now the active agg should be connect to backup switch
> +bond_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show bond0"
> ".[].linkinfo.info_data.ad_info.aggregator")
> +eth2_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show eth2"
> ".[].linkinfo.info_slave_data.ad_aggregator_id")
> +# shellcheck disable=SC2034
> +if [ "${bond_agg_id}" -ne "${eth2_agg_id}" ]; then
> + RET=1
> +fi
> +log_test "bond 802.3ad" "ad_actor_port_prio switch"
> +
> +exit "${EXIT_STATUS}"
> diff --git a/tools/testing/selftests/net/forwarding/lib.sh
> b/tools/testing/selftests/net/forwarding/lib.sh
> index 508f3c700d71..09b63c6f3dbd 100644
> --- a/tools/testing/selftests/net/forwarding/lib.sh
> +++ b/tools/testing/selftests/net/forwarding/lib.sh
> @@ -551,30 +551,6 @@ wait_for_dev()
> fi
> }
>
> -cmd_jq()
> -{
> - local cmd=$1
> - local jq_exp=$2
> - local jq_opts=$3
> - local ret
> - local output
> -
> - output="$($cmd)"
> - # it the command fails, return error right away
> - ret=$?
> - if [[ $ret -ne 0 ]]; then
> - return $ret
> - fi
> - output=$(echo $output | jq -r $jq_opts "$jq_exp")
> - ret=$?
> - if [[ $ret -ne 0 ]]; then
> - return $ret
> - fi
> - echo $output
> - # return success only in case of non-empty output
> - [ ! -z "$output" ]
> -}
> -
> pre_cleanup()
> {
> if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
> diff --git a/tools/testing/selftests/net/lib.sh
> b/tools/testing/selftests/net/lib.sh
> index 006fdadcc4b9..4c278829e04c 100644
> --- a/tools/testing/selftests/net/lib.sh
> +++ b/tools/testing/selftests/net/lib.sh
> @@ -616,3 +616,27 @@ wait_local_port_listen()
> sleep 0.1
> done
> }
> +
> +cmd_jq()
> +{
> + local cmd=$1
> + local jq_exp=$2
> + local jq_opts=$3
> + local ret
> + local output
> +
> + output="$($cmd)"
> + # it the command fails, return error right away
> + ret=$?
> + if [[ $ret -ne 0 ]]; then
> + return $ret
> + fi
> + output=$(echo $output | jq -r $jq_opts "$jq_exp")
> + ret=$?
> + if [[ $ret -ne 0 ]]; then
> + return $ret
> + fi
> + echo $output
> + # return success only in case of non-empty output
> + [ ! -z "$output" ]
> +}
> --
> 2.46.0
>
