On Sun, Jan 18, 2026 at 10:54:04PM +0900, Koichiro Den wrote:
> DesignWare EP eDMA can generate interrupts both locally and remotely
> (LIE/RIE). Remote eDMA users need to decide, per channel, whether
> completions should be handled locally, remotely, or both. Unless
> carefully configured, the endpoint and host would race to ack the
> interrupt.
>
> Introduce a per-channel interrupt routing mode and export small APIs to
> configure and query it. Update v0 programming so that RIE and local
> done/abort interrupt masking follow the selected mode. The default mode
> keeps the original behavior, so unless the new APIs are explicitly used,
> no functional changes.
>
> Signed-off-by: Koichiro Den <[email protected]>
> ---
> drivers/dma/dw-edma/dw-edma-core.c | 52 +++++++++++++++++++++++++++
> drivers/dma/dw-edma/dw-edma-core.h | 2 ++
> drivers/dma/dw-edma/dw-edma-v0-core.c | 26 +++++++++-----
> include/linux/dma/edma.h | 44 +++++++++++++++++++++++
> 4 files changed, 116 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c
> b/drivers/dma/dw-edma/dw-edma-core.c
> index b9d59c3c0cb4..059b3996d383 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -768,6 +768,7 @@ static int dw_edma_channel_setup(struct dw_edma *dw, u32
> wr_alloc, u32 rd_alloc)
> chan->configured = false;
> chan->request = EDMA_REQ_NONE;
> chan->status = EDMA_ST_IDLE;
> + chan->irq_mode = DW_EDMA_CH_IRQ_DEFAULT;
>
> if (chan->dir == EDMA_DIR_WRITE)
> chan->ll_max = (chip->ll_region_wr[chan->id].sz /
> EDMA_LL_SZ);
> @@ -1062,6 +1063,57 @@ int dw_edma_remove(struct dw_edma_chip *chip)
> }
> EXPORT_SYMBOL_GPL(dw_edma_remove);
>
> +int dw_edma_chan_irq_config(struct dma_chan *dchan,
> + enum dw_edma_ch_irq_mode mode)
> +{
> + struct dw_edma_chan *chan;
> +
> + switch (mode) {
> + case DW_EDMA_CH_IRQ_DEFAULT:
> + case DW_EDMA_CH_IRQ_LOCAL:
> + case DW_EDMA_CH_IRQ_REMOTE:
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (!dchan || !dchan->device)
> + return -ENODEV;
> +
> + chan = dchan2dw_edma_chan(dchan);
> + if (!chan)
> + return -ENODEV;
> +
> + chan->irq_mode = mode;
> +
> + dev_vdbg(chan->dw->chip->dev, "Channel: %s[%u] set irq_mode=%u\n",
> + str_write_read(chan->dir == EDMA_DIR_WRITE),
> + chan->id, mode);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_edma_chan_irq_config);
> +
> +bool dw_edma_chan_ignore_irq(struct dma_chan *dchan)
> +{
> + struct dw_edma_chan *chan;
> + struct dw_edma *dw;
> +
> + if (!dchan || !dchan->device)
> + return false;
> +
> + chan = dchan2dw_edma_chan(dchan);
> + if (!chan)
> + return false;
> +
> + dw = chan->dw;
> + if (dw->chip->flags & DW_EDMA_CHIP_LOCAL)
> + return chan->irq_mode == DW_EDMA_CH_IRQ_REMOTE;
> + else
> + return chan->irq_mode == DW_EDMA_CH_IRQ_LOCAL;
> +}
> +EXPORT_SYMBOL_GPL(dw_edma_chan_ignore_irq);
> +
> MODULE_LICENSE("GPL v2");
> MODULE_DESCRIPTION("Synopsys DesignWare eDMA controller core driver");
> MODULE_AUTHOR("Gustavo Pimentel <[email protected]>");
> diff --git a/drivers/dma/dw-edma/dw-edma-core.h
> b/drivers/dma/dw-edma/dw-edma-core.h
> index 71894b9e0b15..8458d676551a 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.h
> +++ b/drivers/dma/dw-edma/dw-edma-core.h
> @@ -81,6 +81,8 @@ struct dw_edma_chan {
>
> struct msi_msg msi;
>
> + enum dw_edma_ch_irq_mode irq_mode;
> +
> enum dw_edma_request request;
> enum dw_edma_status status;
> u8 configured;
> diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c
> b/drivers/dma/dw-edma/dw-edma-v0-core.c
> index 2850a9df80f5..80472148c335 100644
> --- a/drivers/dma/dw-edma/dw-edma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
> @@ -256,8 +256,10 @@ dw_edma_v0_core_handle_int(struct dw_edma_irq *dw_irq,
> enum dw_edma_dir dir,
> for_each_set_bit(pos, &val, total) {
> chan = &dw->chan[pos + off];
>
> - dw_edma_v0_core_clear_done_int(chan);
> - done(chan);
> + if (!dw_edma_chan_ignore_irq(&chan->vc.chan)) {
> + dw_edma_v0_core_clear_done_int(chan);
> + done(chan);
> + }
>
> ret = IRQ_HANDLED;
> }
> @@ -267,8 +269,10 @@ dw_edma_v0_core_handle_int(struct dw_edma_irq *dw_irq,
> enum dw_edma_dir dir,
> for_each_set_bit(pos, &val, total) {
> chan = &dw->chan[pos + off];
>
> - dw_edma_v0_core_clear_abort_int(chan);
> - abort(chan);
> + if (!dw_edma_chan_ignore_irq(&chan->vc.chan)) {
> + dw_edma_v0_core_clear_abort_int(chan);
> + abort(chan);
> + }
>
> ret = IRQ_HANDLED;
> }
> @@ -331,7 +335,8 @@ static void dw_edma_v0_core_write_chunk(struct
> dw_edma_chunk *chunk)
> j--;
> if (!j) {
> control |= DW_EDMA_V0_LIE;
> - if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
> + if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) &&
> + chan->irq_mode != DW_EDMA_CH_IRQ_LOCAL)
> control |= DW_EDMA_V0_RIE;
> }
>
> @@ -408,12 +413,17 @@ static void dw_edma_v0_core_start(struct dw_edma_chunk
> *chunk, bool first)
> break;
> }
> }
> - /* Interrupt unmask - done, abort */
> + /* Interrupt mask/unmask - done, abort */
> raw_spin_lock_irqsave(&dw->lock, flags);
>
> tmp = GET_RW_32(dw, chan->dir, int_mask);
> - tmp &= ~FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id));
> - tmp &= ~FIELD_PREP(EDMA_V0_ABORT_INT_MASK, BIT(chan->id));
> + if (chan->irq_mode == DW_EDMA_CH_IRQ_REMOTE) {
> + tmp |= FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id));
> + tmp |= FIELD_PREP(EDMA_V0_ABORT_INT_MASK,
> BIT(chan->id));
> + } else {
> + tmp &= ~FIELD_PREP(EDMA_V0_DONE_INT_MASK,
> BIT(chan->id));
> + tmp &= ~FIELD_PREP(EDMA_V0_ABORT_INT_MASK,
> BIT(chan->id));
> + }
> SET_RW_32(dw, chan->dir, int_mask, tmp);
> /* Linked list error */
> tmp = GET_RW_32(dw, chan->dir, linked_list_err_en);
> diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h
> index ffad10ff2cd6..6f50165ac084 100644
> --- a/include/linux/dma/edma.h
> +++ b/include/linux/dma/edma.h
> @@ -60,6 +60,23 @@ enum dw_edma_chip_flags {
> DW_EDMA_CHIP_LOCAL = BIT(0),
> };
>
> +/*
> + * enum dw_edma_ch_irq_mode - per-channel interrupt routing control
> + * @DW_EDMA_CH_IRQ_DEFAULT: LIE=1/RIE=1, local interrupt unmasked
> + * @DW_EDMA_CH_IRQ_LOCAL: LIE=1/RIE=0
> + * @DW_EDMA_CH_IRQ_REMOTE: LIE=1/RIE=1, local interrupt masked
> + *
> + * Some implementations require using LIE=1/RIE=1 with the local interrupt
> + * masked to generate a remote-only interrupt (rather than LIE=0/RIE=1).
> + * See the DesignWare endpoint databook 5.40, "Hint" below "Figure 8-22
> + * Write Interrupt Generation".
> + */
> +enum dw_edma_ch_irq_mode {
> + DW_EDMA_CH_IRQ_DEFAULT = 0,
> + DW_EDMA_CH_IRQ_LOCAL,
> + DW_EDMA_CH_IRQ_REMOTE,
> +};
> +
> /**
> * struct dw_edma_chip - representation of DesignWare eDMA controller
> hardware
> * @dev: struct device of the eDMA controller
> @@ -105,6 +122,22 @@ struct dw_edma_chip {
> #if IS_REACHABLE(CONFIG_DW_EDMA)
> int dw_edma_probe(struct dw_edma_chip *chip);
> int dw_edma_remove(struct dw_edma_chip *chip);
> +/**
> + * dw_edma_chan_irq_config - configure per-channel interrupt routing
> + * @chan: DMA channel obtained from dma_request_channel()
> + * @mode: interrupt routing mode
> + *
> + * Returns 0 on success, -EINVAL for invalid @mode, or -ENODEV if @chan does
> + * not belong to the DesignWare eDMA driver.
> + */
> +int dw_edma_chan_irq_config(struct dma_chan *chan,
> + enum dw_edma_ch_irq_mode mode);
> +
> +/**
> + * dw_edma_chan_ignore_irq - tell whether local IRQ handling should be
> ignored
> + * @chan: DMA channel obtained from dma_request_channel()
> + */
> +bool dw_edma_chan_ignore_irq(struct dma_chan *chan);
> #else
> static inline int dw_edma_probe(struct dw_edma_chip *chip)
> {
> @@ -115,6 +148,17 @@ static inline int dw_edma_remove(struct dw_edma_chip
> *chip)
> {
> return 0;
> }
> +
> +static inline int dw_edma_chan_irq_config(struct dma_chan *chan,
> + enum dw_edma_ch_irq_mode mode)
> +{
> + return -ENODEV;
> +}
> +
> +static inline bool dw_edma_chan_ignore_irq(struct dma_chan *chan)
> +{
> + return false;
> +}
I think it'd better go thought
struct dma_slave_config {
...
void *peripheral_config;
size_t peripheral_size;
};
So DMA consumer can use standard DMAengine API, dmaengine_slave_config().
Frank
> #endif /* CONFIG_DW_EDMA */
>
> struct pci_epc;
> --
> 2.51.0
>
