This is my first post on this list, so hopefully I have the right list? If not i'm sure I will be told ;o)
I am trying to get my TechnoTrend 'Budget S-1500' (SAA7146) with CI daughter board working. I have programmed the trex with predator and everything (FTA and encrypted) works fine in windows XP, my intention is to use the card on a Fedora Core 5 machine as part of a MythTV set up. In FC5 I can watch FTA channels using Kaffeine and Xine (not tried Myth yet), but the encrypted channels fail to display anything. I am running kernel-2.6.20-1.2312.fc5, the pertinent DMESG output is - saa7146: register extension 'budget_ci dvb'. ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20 saa7146: found saa7146 @ mem dca08000 (revision 1, irq 20) (0x13c2,0x1017). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget/S-1500 PCI). saa7146: register extension 'budget dvb'. adapter has MAC addr = 00:d0:5c:07:e4:01 input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4 budget_ci: CI interface initialised hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 dvb_ca adapter 0: DVB CAM detected and initialised successfully DVB: registering frontend 0 (ST STV0299 DVB-S)... To me it appears that the CI/CAM are initialising perfectly, but still unable to view anything except FTA. Any ideas appreciated!
_______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
