I've got my Hauppauge Nexus-S (same as TechnoTrend Premium) installed in my Fedora 6 box. The device driver seems to load ok (right pieces appear in /dev/dvb), but I can't tune anything. My dish has two LNB's, a 2 port diseqc switch and the dish is already aligned for Echostars 110 and 119. When I run a scan, it never tunes. (See below, including the Echostar-100 file I created). Can anyone tell me what these errors means? What can I do about it? Thanks, Michelle ---------------------------------------------------------------------------- --------------------------- [EMAIL PROTECTED] dvb-s]# scan -v -s 1 Echostar-110 scanning Echostar-110 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12268000 L 20000000 5 >>> tune to: 12268:h:1:20000 DiSEqC: switch pos 1, 18V, hiband (index 7) DVB-S IF freq is 1668000 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 WARNING: >>> tuning failed!!! >>> tune to: 12268:h:1:20000 (tuning failed) DiSEqC: switch pos 1, 18V, hiband (index 7) DVB-S IF freq is 1668000 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 >>> tuning status == 0x02 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done.
[EMAIL PROTECTED] dvb-s]# cat Echostar-110 # Michelle's test file for Echostar 10 @ 110 S 12268000 L 20000000 5/6 #S 12545000 R 20000000 5/6 #S 12588000 L 20000000 5/6 #S 12608000 R 20000000 5/6
_______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
