Hmm... and before I forget... I can recover from the problem by removing and replugging the SAT cable from the card. An reboot however will not help, only power-off power-on. This is why I assume some DISEQC related...
-----Original Message----- From: Remy Bohmer [mailto:[EMAIL PROTECTED] Sent: Dienstag, 17. Juli 2007 18:36 To: Manuel Kampert Cc: [email protected] Subject: Re: [linux-dvb] Twinhan VP-1030C Diseq problem Hello Manuel, > Tuning different channels on the Astra system is no problem. Also switching > to Hotbird Is working fine. If I try to switch back from Hotbird to Astra this is not > working anymore. > The card tries to tune the frequency but does not change the LNB. Exactly the same problem here! I have no solution yet. My system contains a Core2Duo E6600 2.4GHz core, and I have a Skystar 1 CI v3.0 card, which is a clone of the card you mention. I run MythTV. Could it be timing related? I also want to help debugging this problem. Kind Regards, Remy Böhmer _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
