Hi,

Please try DO NOT use HTML format to send mails to the list. Use plain text 
instead.

Best regards,
Lo Chun Chung (Chung)
[EMAIL PROTECTED] HK. 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of lwtbenben
Sent: Friday, 20 July, 2007 9:10 AM
To: linux-dvb
Subject: [linux-dvb] What is the problem with my mail?


Hi everyone     What is the problem with my mail, why is it so ugly.    Can 
some guy help me?Message: 1Date: Thu, 19 Jul 2007 18:12:42 +0800 (CST)From: 
lwtbenben <[EMAIL PROTECTED]>Subject: Re: [linux-dvb] Do we have a guide for 
Dvico FusionHDTV5 USB      Gold setup?To: "Michael Krufky" <[EMAIL 
PROTECTED]>Cc: linux-dvb <[email protected]>Message-ID:     <[EMAIL 
PROTECTED]>Content-Type: text/plain; charset="gbk" Dear Michael:    I got the 
firmware and now the card works properly.    But only for SDTV, when I saw HDTV 
using my card and totem-xine,    it seems good for about 2 mins and then it 
gives me bad performance.       What is the problem? Is it the hardware or the 
movie player?    Which player should I use for HDTV, please.       Thank 
you.?2007-07-19?"Michael Krufky" <[EMAIL PROTECTED]> ???lwtbenben wrote: > 
Hi,everyone > I have a Dvico FusionHDTV5 USB Gold card at hand, is there any 
guide to set up the card? > Thank you very much. This device is well supported 
in kernel versions 2.6.16 and later. You'll need the firmware, located at: 
http://linuxtv.org/downloads/firmware/dvb-usb-bluebird-01.fw Put this into 
/lib/firmware (location may vary depending on the distro) Plug the device in, 
and then it should function with any standard dvb application. Good Luck, Mike 
Krufky-------------- next part --------------An HTML attachment was 
scrubbed...URL: 
http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070719/545d2907/attachment-0001.htm







轻 轻 的,大 话 3 来 了。赶 快 收 拾 行 囊,开 始 我 们 的 探 营 之 旅 吧! 

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to