Hi people, i'm using suse 7.2, kernel 2.4.4 with vdr 0.83. In the last few days i'm expierencing the following problem: While recording the picture and audio scrambles (mpeg blocks) and flickers for several seconds and then is only black and no audio. /var/log/messages says something about no video and vdr does it's emergency routines (unload and reload the drivers) After fresh loading the drivers (by vdr) the n-tv channel is up and running - then vdr tries to switch to the last tuned channel (e.g. pro7) and again just black (/var/log/messages says channel 7 not synced) - and the whole procedure again and again and again... Even rebooting the system didn't help ! And then after several minutes all problems are gone ... However it seems that the problem appears more often lately :-( Any idea what could cause this ? I can't think of any hardware problems with the card or the lnb causing this - or ?! But on the other hand drivers are completely new loaded - at least after reboot - so ... ? Can anyone help ? Martin. btw: I'm using the Hauppauge WinTV rev. 1.3 -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
