Hi all, this mail I sent to Hauppauge helpline. As expected, they pointed me to some drive-updates for Windoze ... Since I told them *again*, that no Windoze is running, and the problem occurs w/o any OS, they didn't respond ;-) Maybe the guys in this list will have an idea or at least some hints: I run a Hauppauge DVB-S on a Duron900, GA7ZX, 128MB machine. After a couple of hours the card hangs, yesterday the complete machine crashed. Without doing anything else I reboot, and from now on *not even the BIOS* detects this card anymore. Also linux's lspci tells me about free slot #4. (or any other I tested) I can remove the card and put it back - still undetected. Only thing that helps is to put the DVB card to an other PC (233MMX) Power it on, wait for 'insert Bootdisk' and power off. When the card is placed back in my Duron, it'll be detected until it hangs again and I go round_robin by telling that... Any ideas what to do for getting a little closer what the reason/problem might be ? BTW: Bios is latest, on all PCI slots same behaviour, no/all other cards, BIOS settings, IRQ ... checked and changed *hmmm* TIA Ralf -- -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
