Hi all, I have successully installed a Skystar DVB Sat-1 card and managed to make it work with DVB drivers from the CVS. Tuxzap and tuxview applications work fine. Unfortunately when I run VDR, the screen clears and the cursor stays on the top left of the terminal and I get nothing but sound. The output of /var/log/messages has as follows: Aug 9 03:16:29 uranus vdr[3197]: VDR version 0.90 started Aug 9 03:16:29 uranus vdr[3197]: loading /video/setup.conf Aug 9 03:16:29 uranus vdr[3197]: loading /video/channels.conf Aug 9 03:16:29 uranus vdr[3197]: loading /video/keys-pc.conf Aug 9 03:16:29 uranus vdr[3197]: probing /dev/ost/qpskfe0 Aug 9 03:16:29 uranus vdr[3199]: EIT processing thread started (pid=3199) - master Aug 9 03:16:29 uranus vdr[3197]: probing /dev/ost/qpskfe1 Aug 9 03:16:29 uranus vdr[3197]: probing /dev/ost/qamfe1 Aug 9 03:16:29 uranus vdr[3197]: found 1 video device Aug 9 03:16:29 uranus vdr[3197]: setting primary DVB to 1 Aug 9 03:16:29 uranus vdr[3197]: switching to channel 1 Aug 9 03:16:29 uranus vdr[3197]: ERROR (dvbapi.c,3015): Invalid argument Aug 9 03:16:29 uranus last message repeated 5 times Aug 9 03:16:29 uranus vdr[3197]: SVDRP listening on port 2001 I am running redhat 7.0 with kernel 2.4.2 Many thanks in advance, Lefteris Xanthoudakis [EMAIL PROTECTED] -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
