Hello,
we (me and a workmate) use a linux-pc with a DVB-card.
The first card did work fine (Siemens,linux-2.2.17,dvb 0.81?,vdr 0.71?).
Now my workmate uses an other card with a SAA7146 (IMHO hauppauge).
Now this card also works (VDR too):
frank$ls -l
insgesamt 8
drwxr-xr-x 7 frank frank 4096 Aug 30 18:47 DVB
drwxr-xr-x 5 frank frank 4096 Aug 30 19:47 VDR
lrwxrwxrwx 1 frank frank 3 Aug 30 18:47 siemens_dvb-0.9-20010822-DVB
-> DVB
lrwxrwxrwx 1 frank frank 3 Aug 31 17:24 vdr-0.93 -> VDR
frank$uname -a
Linux XXXXXX 2.4.9-ac3fm1 #4 Don Aug 30 18:02:14 CEST 2001 i686 unknown
With the new card/driver these commands fail:
cat 001.vdr >/dev/video
cat /dev/video >1.vdr
Recording/replaying with VDR works fine.
Are the video-devices not supported on other cards than Siemens?
Any other suggestions?
Do you need to know the exact type of the card? Well, then I have to open
the PC. ;-)
regards,
Frank Meurer
--
Sending unsolicited commercial email to this address may be a violation
of the Washington State Consumer Protection Act, chapter 19.86 RCW.
Frank Meurer <[EMAIL PROTECTED]>, PGP ID: 0x5E756DA8
Key fingerprint = 169A 1138 8DB4 528F 2F01 20A6 EDD8 49C3 5E75 6DA8
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
