[EMAIL PROTECTED] wrote:
>
> ...mhh, i thought the only way the tuner "controlls" the LNB is by switching
>polarisation (so at least the stations at the same pol should work).
The satellite equipment control (SEC) part of the SAT frontend
switches between H/V polarization and high/low band, and can
send DiSEqC commands to possibly control other switches.
The driver disables loop-through, and by default (when dvb.o is
loaded with init_chan=2 [see DVB/driver/Makefile]) switches
to n-tv in the Astra high band, presuming you can receive Astra 19.2E.
After that analog channels (which usually are in the low band on Astra)
won't work unless you re-enable loop-through or switch to a
transponder in Astra low band, e.g. to the IFA-TV channel recently
mentioned here (which still broadcasts).
Regards,
Johannes
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
