----- Original Message ----- From: Hakenes Rolf <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, September 17, 2001 3:43 PM Subject: Re: dvb-c: trouble with cable-provider > > -----Urspr�ngliche Nachricht----- > > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > > Gesendet: Montag, 17. September 2001 14:15 > > An: [EMAIL PROTECTED] > > Betreff: [linux-dvb] dvb-c: trouble with cable-provider > > > > > > > > hi all, > > first of all, thanks for your great stuff for watching > > digital-tv. but i have following problem: the driver isn't > > work with my cable-provider. i tested it on other providers > > (they uses the telekom-settings) and there are no problems, > > all work fine (i tested with my machine). but in my home - no > > linux-tv. the win-software works also fine. > > where's the problem? > > dtv_scan (scanned in raster of 1 MHz) found absolutely nothing. > > in my mind, the function mon_zigzag (..) (only uses by driver > > in my rooms, not in 'telekom-cable') will hang-up my > > tuner-chip (original siemens dvb-c card). > > the frequency-range of my provider is 354MHz to 426MHz, > > stepwidth 8MHz. the symbolrate is mainely 6875.000, one or > > two frequencies on 6900.000. > > where's the way to watch digi-tv with your excellent work in my rooms? > > > Hi, > > the easiest way (IMO) would be to get the correct transponder settings > (Freq/Symbolrate) from your Windows software (should be only a few) and > setup dtv_scan to look for these transponders. This should work... > > Regards, > > Rolf thanks for your quickly answer, i did it, but dtv_scan (step-width down to 1Mhz) can't find anything. also vdr, started with the correct freq/symb.-rate in channels.conf - nothing. modifications in dvb.c (init_chan) - no effect. the units of freq./symb.-rate of win-software is verified and correct (comparision with the working telekom-signal). it seems, that the driver switch to a function mon_zigzag (...), and the dvb-tuner hangs-up. by connection with telekom-cable, the mon_zigzag () will not called. best regards holger -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
