Since the list does not seem to allow attachements, but the patch is
very small, here it is included inline in this message :
After applying the patch, copy dvbd.conf to /etc/dvbd.conf and edit it :
change the definition
filter_1 3003 your_MAC 48
replacing "your_MAC" with the MAC address of the DVB card. (the one you
used when you subscribed to OpenSKY).
================ dvbd3.patch
=================================================
diff -urb dvbd3.orig/dvbd.c dvbd3/dvbd.c
--- dvbd3.orig/dvbd.c Wed Aug 8 09:29:13 2001
+++ dvbd3/dvbd.c Tue Nov 13 19:13:46 2001
@@ -170,7 +170,11 @@
case 'f':
ret = atoi (optarg) ;
- if (ret > 10600000 && ret < 14500000)
+ if (ret > 10600000 && ret < 11700000)
+ {
+ front.freq = front.curfreq = ((__u32) ret - 9750000) * 1000 ;
+ } else
+ if (ret > 11700000 && ret < 14500000)
{
front.freq = front.curfreq = ((__u32) ret - 10600000) * 1000
;
}
@@ -1275,7 +1279,11 @@
{
ret = (__u32) atoi (s) ;
- if ((ret > 10600000) && (ret < 14500000))
+ if ((ret > 10600000) && (ret < 11700000))
+ {
+ fend->freq = fend->curfreq = ((__u32) ret - 9750000) * 1000 ;
+ } else
+ if ((ret > 11700000) && (ret < 14500000))
{
fend->freq = fend->curfreq = ((__u32) ret - 10600000) * 1000
;
}
diff -urb dvbd3.orig/dvbd.conf dvbd3/dvbd.conf
--- dvbd3.orig/dvbd.conf Sat Aug 4 20:39:00 2001
+++ dvbd3/dvbd.conf Tue Nov 13 19:17:52 2001
@@ -19,7 +19,7 @@
#
# ASTRA 1G/1H
#
-symbolrate 22000000
+symbolrate 27500000
#
# frequency [kHz]
#
@@ -37,11 +37,11 @@
#
# ASTRA TR 115
#
-frequency 12662750
+frequency 11262300
#
# 22 kHz signal to LNB. on=1/off=0
#
-ttk 1
+ttk 0
#
# DiSEqC. on=1/off=0
#
@@ -71,7 +71,8 @@
#
# syntax: filter_0 <PID> [<netdevice | IP[/bitmask]>]
#
-filter_0 512 eth0
+filter_0 3003 dvb0
+filter_1 3003 !!!your_MAC!!! 48
#
# other MPE filters (these are intended to filter multicast traffic).
#
==================== end of dvbd3.patch
=====================================
--
ing. Andrei Boros
mailto:[EMAIL PROTECTED] / +40-1-303-1865
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
