Hello, even more interesting would be: The DVB-C provides a 10-pin connector on the layout where we would expect the J2 connector. But nobody has been able to find out if it is a J2 connector, so far. Since Siemens provides almost anything on the external connector you would need the J2 most probably only for an internal connection e.g. for SPDIF. I just wasn't brave enough to just try out.
Greeting, CR. > -----Urspr�ngliche Nachricht----- > Von: Lauri Pesonen [mailto:[EMAIL PROTECTED]] > Gesendet: Donnerstag, 3. Januar 2002 09:25 > An: [EMAIL PROTECTED] > Betreff: [linux-dvb] DVB-C Rev.2.1 and J2 > > > Hi guys, > > I got my DVB-C card yesterday after a very long wait! > > When I look at the card, the layout looks just like the one > described in > http://www.lindy.cc/local/LinuxDVB.nsf/dvbs_board.jpg with all the Jx > connectors. > > I've been following the mailinglist for a while now, and I've seen a > couple of postings saying that rev.2.1 boards do not offer > RGB/S-video/SPdif output from J2. Does this mean that: > > * rev.2.1 cards do have the J2 connector, but it does not provide the > above mentioned signals any longer? > > * DVB-S rev.2.1 cards do not have the J2 connector anymore, but DVB-C > rev.2.1 cards have it and it does work as before? > > All in all, I just want to know whether I van get RGB out of > my DVB card > ;) > > Br, Lauri > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with > "unsubscribe linux-dvb" as subject. > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
