Hello John, some feedback from your last patch.
camenu is now working on my ASTON CAM : -------------- from dmesg ----------------------------- [root@patman driver]# ./camenu module name count 0 lines 0 header lines 0 count 1 lines 0 header lines 0 count 2 lines 0 header lines 0 count 3 lines 6 header lines 2 type 84 text AstonCrypt V1.05 type 84 text Welcome type 0 text type 83 (option 1) text Consultation type 83 (option 2) text Information type 83 (option 3) text Parameters count 4 lines 6 header lines 2 ...... count 11 lines 6 header lines 2 type 84 text AstonCrypt V1.05 type 84 text Service Information type 0 text type 83 (option 1) text CANALSATELLITE type 83 (option 2) text list 0 from 01/01/1990 to 28/02/2002 type 83 (option 3) text 7 1 .... count 26 lines 6 header lines 2 type 84 text AstonCrypt V1.05 type 84 text Service Information type 0 text type 83 (option 1) text CANAL+ type 83 (option 2) text list 0 from 01/01/1990 to 28/02/2002 type 83 (option 3) text 1 ---------------------------------------------------------------- Good news . And CAM is working on Canal+/Canal Satellite using tuxzap : ------------------from dmesg ------------------------------------ freq 1256000 spec inv 2 sr 27500000 fec 3 into GetEvent ret 0 gpio interrupt for common interface: len 8 CI input length 8: 00 01 0e 00 05 41 73 74 ?????Ast ci_slot is 4 data[0] is 14 ----------------------------------------------------------- But i have problem tring to sync on alternate Audio PID ; it seems APID is directly synced with VPID. Is this normal ? (i haven't looked yet at the patch lidbvb code ; i am too lazy ) Anyway , you have done a great job. thanks again !! Patrick. JohnW wrote: > > Hello everyone, > > The last patch I released to use the original firmware was messed up and > did not work properly. Sorry. > > I've put what I hope is a good version on > http://www.linuxdvb.tv/driver/index.html. I've tried this one with Aston > and Irdeto CAMS and it works OK for me (but I didn't try the alternate > audio PIDS). > > John > ______________________________________________ > The information contained in this e-mail is intended only for the person > or entity to which it is addressed and may contain confidential and/or > privileged material. If you are not the intended recipient of this > e-mail, the use of this information or any disclosure, copying or > distribution is prohibited and may be unlawful. > If you received this in error, please contact the sender and delete the > material from any computer. > The views expressed in this e-mail may not necessarily be the views of > The PCMS Group plc and should not be taken as authority to carry out any > instruction contained. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
