Andrei Boros <[EMAIL PROTECTED]> wrote: flyer musculitz wrote: > >
> I used skystar 1 with 2.4.x for a short time as you > described (with patching dvbd). It worked. > As I know dvbd sets MAC-address itself and overwrites > your settings. So show me your dvbd.conf. > > this is one of the dvbd.conf i tryed > > defaultgwdev ppp0 > power 1 > symbolrate 22000000 > # ASTRA TR 115 > frequency 12662750 > ttk 1 > diseqc 1 > AFC 1 > polarisation 1 > filter_0 512 I think you should have put here filter_0 512 ppp0 ^^^^^ dvbd will take the IP of this device and rewrite the MAC on the dvb device > ./dvbd > > Fsync = 1073830436, Freq = 2062750000, Sync = 3221224184 Afc = 1073793184 Agc = 178 >Nest = 16404 Vber = 1075104912 Sync should be 127, Vber should be 0 (or at least < 5000). You seem to have problems with tuning your card. This output is very strange because usually Sync=0 when there's no signal. Note that without the /dev/video and support for it in the drivers, dvbd will not tune correctly. The line you commented that gave invalid ioctl error is the one that sets the tuning parameters to the card's tuner module. > ifconfig dvb0_0 hw ether 00:02:D9:9C:90:43 dvbd should do this, not you. If it's a dial-up line, most likely you get assigned a different IP address every time you call. If it's a leased line, then this is acceptable. > > i don't know how to check for the signal strength. The dvb and dish worked before on >the old >server with rh 6.2 so the dish is well oriented.The only problem i guess is >dvbd or MAC -- ing. Andrei Boros mailto:[EMAIL PROTECTED] / +40-1-303-1870 Centrul pt. Tehnologia Informatiei Societatea Romana de Radiodifuziune --------------------------------- Do You Yahoo!? Send FREE video emails in Yahoo! Mail. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
