Matthias L�tzke wrote: > > Hello! > > I can not receive and display certain TV-channels during normal > operation. > But they are received and displayed correcty during a system-halt! > > Only a few channels are unviewable and unuseable for me due to > terrible quality, i.e. VIVA and N-TV. All others work fine. > After I issue a "halt" command -just before I should power down my > box- they are received and displayed perfectly by the DVB-s card! > I tried different versions (v 0.93, 11/2001 and 02/2002) of the > driver, but the result was always the same. > This happens with a rev 1.3 card. I tried a rev 2.1 card and it > worked fine without this problem. I use an old Asus T2P4 board with > a 133 MHz CPU. May be this behavior is due to the old PCI 2.0 slots? > Do You have any clues? > > TIA > Matthias. > > PS: I never had problems due to CPU or I/O speed. Even with two DVB > cards working simultaneously under VDR.
I also have a Siemens rev 1.3 card and can receive N-TV and VIVA without any problems. I'm currently using driver version 2002-01-19. Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: [EMAIL PROTECTED] D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
