Hi, I recently found out that I sometimes can tune to a sender and after reloading the driver the driver is unable to tune in again, with same parameters. Any ideas? Karsten
Am Freitag, 4. Oktober 2002 02:14 schrieb Karsten Becker: > Hi, > I tested the Newstruct-driver and it seems to work better than the old > ones. But i got one big problem. I got no stream from it. > > dvbtune can lock to a channel, but can't read pat or sdt. And dvbstream -o > doesn't output anything with same options! > I wrote a Script to try all avaible QAM and CR's but I didn't get it to > something usefull. Any ideas? > > Yuppi:/home/yuppi/dvbtune # ./dvbtune -f 762000000 -bw 8 -gi 4 -cr 7_8 -qam > 256 -tm 8 -i > Using DVB card "Grundig 29504-401" > tuning DVB-T (Hamburg) to 762000000 > polling.... > Getting frontend event > FE_STATUS: > polling.... > Getting frontend event > FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI > FE_HAS_SYNC Event: Frequency: 761999132 > SymbolRate: 0 > FEC_inner: 7 > Bit error rate: 115 > Signal strength: 10280 > SNR: 57825 > FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI > FE_HAS_SYNC <transponder type="T" freq="762000000"> > Nothing to read from fd_pat > Nothing to read from fd_sdt > </transponder> > Yuppi:/home/yuppi/dvbtune # ./dvbtune -f 762000000 -bw 8 -gi 4 -cr 7_8 -qam > 256 -tm 8 -m > Signal=10023, Verror=128, SNR=57568dB, BlockErrors=362, (S|L|C|V|SY|) > Signal=10537, Verror=113, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=85, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=97, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=105, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=111, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=104, SNR=58853dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=109, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=100, SNR=58853dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10794, Verror=106, SNR=58853dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=85, SNR=58853dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=104, SNR=58853dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=92, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > Signal=10537, Verror=119, SNR=58596dB, BlockErrors=0, (S|L|C|V|SY|) > > BTW. Are this good tuning values? > Karsten -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
