Hi, I have Problem's with the H Polarization on my Hauppauge Nexus DVB. all other Feature work very fine also the lirc from the Card... but when i switch to a Channel with H Polarization i get no Picture. I have bough me a Sat-finder which shows the voltage and tone signal and this is fine ... so I have install Win 2000 and the orig. Driver from Hauppauge on a second Partition and every thing goes fine. So it is not a Hardware Problem. The next step was: checking the Voltage with windows driver and with Linux driver : Linux DVB Driver V Polarization 13.5 Volt Linux DVB Driver H Polarization 19.5 Volt
W2k Hauppauge Driver V Polarization 15,8 Volt W2k Hauppauge Driver H Polarization 22,0 Volt the i look into the source file's - but i have only found a switching in the SEC part from volt=0 or =1 now i out of idea and hope anyone can help me System is running on Suse 7.3 and Driver siemens_dvb-0.9.4 - lirc 0.6.6 and VDR 1.0.4 -- best regards, Christoph mailto:cjansen@;heja.de -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
