Hi, an Label on the card says Rev 2.2 - is it supported
Christoph ------------------------------------------------------------------------ Thursday, November 7, 2002, 7:29:15 PM : HW> Hi, HW> Christoph Jansen wrote: >> Hi, >> >> I have Problem's with the H Polarization on my Hauppauge Nexus DVB. >> all other Feature work very fine also the lirc from the Card... but >> when i switch to a Channel with H Polarization i get no Picture. >> I have bough me a Sat-finder which shows the voltage and tone signal >> and this is fine ... so I have install Win 2000 and the orig. Driver >> from Hauppauge on a second Partition and every thing goes fine. >> So it is not a Hardware Problem. >> The next step was: checking the Voltage with windows driver and with >> Linux driver : >> Linux DVB Driver V Polarization 13.5 Volt >> Linux DVB Driver H Polarization 19.5 Volt HW> The DiSEqC spec defines 13.0 and 18.0 volt to switch LNB polarisation, HW> so these values should be fine. >> W2k Hauppauge Driver V Polarization 15,8 Volt >> W2k Hauppauge Driver H Polarization 22,0 Volt HW> I don't know how they do it, please report if you find out any details, HW> then we would be able to implement the high-power ioctl for these cards... HW> Holger -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
