Hello, same problem here. I am using the driver from 2005-20-02 together with vdr 1.0.4. AIO 1009. Since some days with screen is black and there is now sound. When switching to a channel there is no error message (nothing, it seems to be like ever).
When using dvbtune I get this messages: firix:/home/daten/VDR/dvbtune-0.3 # ./dvbtune -f 338000000 -i tuning DVB-T to 338000000 Getting frontend event Received completion event Event: Frequency: 314000000 Bit error rate: -1009688576 Signal strength: 5 SNR: 1 FE_STATUS: FE_HAS_POWER FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_SYNC <transponder type="T" freq="338000000"> Nothing to read from fd_pat Nothing to read from fd_sdt </transponder> Can someone tell me what that means? Even dtv_scan is still giving me the same output and channels.conf as ever. lg, Gerhard On Sun, 17 Nov 2002 18:39:37 +0100 Martin Neuditschko <[EMAIL PROTECTED]> wrote: > Hello! > > Since some days I don' t get any picture / sound anymore. > I am using UPC Digital (Austria) - a cable provider and > the > "Hauppauge DVB-c" card. > I am able to tune to each channel (using czap) and it > locks > very fast, but I don't see anything. Also dvbsak is > working. > DVB-driver from 16.10.02 (whis version was working till > some > days ago) > > Sample outputs: > ,---- > | melchior:/usr/local/src/devel/DVB/apps/szap # ./czap > RTL2 > | using '/dev/dvb/adapter0/frontend0' and > '/dev/dvb/adapter0/demux0' > | tuning to 378000000 Hz > | status 07 | signal 8787 | snr d8d8 | ber 00009c22 | unc > ffffffff | > | status 1f | signal ffff | snr ebeb | ber 00009c22 | unc > ffffffff | > | FE_HAS_LOCK > | status 1f | signal ffff | snr ebeb | ber 00009c22 | unc > 00000000 | > | FE_HAS_LOCK > | status 1f | signal ffff | snr ecec | ber 0002efcb | unc > 00000000 | > | FE_HAS_LOCK > | status 1f | signal ffff | snr eded | ber 00010a00 | unc > 00000000 | > | FE_HAS_LOCK > `---- > ,---- > | melchior:/usr/local/src/devel/dvbsak # ./dvbscan -p > | [PAT 0009] [SDT 0009] [NIT 0009] [NIT 0009] Transport > streams: > | 0x0009: > | 0x0012: > | Orig. network id: 0x0001 > | Cable frequency: 466.000 MHz > | Cable symbol rate: 6900.000 ksym/s > | Cable modulation: 256-QAM > | Cable inner FEC rate: auto > | 0x001A: > | Orig. network id: 0x0001 > | Cable frequency: 842.000 MHz > | Cable symbol rate: 6900.000 ksym/s > | Cable modulation: 256-QAM > | Cable inner FEC rate: auto > | > | [snip] > | > | 0x232D: RTL II>RTL2 [Provider: UPC-TS 09], digital > television service > | CA system: unknown_4749 > | CA ECM/EMM PID: 0x0001 > | PCR PID: 0x08C0 > | Stream PID 0x08C2, ISO/IEC 13818-1 PES packets > containing > | private data > | Stream PID 0x08C1, ISO/IEC 11172 Audio > | Language code: ger > | Stream PID 0x08C0, ISO/IEC 13818-2 Video > | > | [snip] > `---- > > Some ideas to solve or determine the problem? > > best regards > Martin Neuditschko > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with > "unsubscribe linux-dvb" as subject. > ---------------------------------------------- Das ist ein Service von austria.com -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
