[EMAIL PROTECTED] wrote:
after a lot of testing (w/ and w/o my WinTV card installed; w/o ACPI and APIC...) i have now a little bit progress...
With a vanilla kernel 'tzap ZDF' gives me (sometimes):

status 17 | signal 1717 | snr 00000 | ber 00000 | unc 00000 | FE_HAS_LOCK

but i still have no picture :-(

'scan' gives me only timeouts for all three filter 0x00, 0x10 and 0x11.

BTW i can see the Convergence copyright on the TV after insmod but nothing more.

So any hints what i can try next?

I once had the problem that the tuner.o was loaded from the bttv package.
This (of course) can not tune the dvb-t card. Check where your tuner.o come
from. Maybe remove the bttv package for testing and check with modprobe -v where
the modules come from that you load.
When you use a recent driver there should not be any conflicts with any tuner.o anymore.

Holger



--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.

Reply via email to