can you please add your sybsystem_vendor id to this if()-case and test if this works for you? If so, please send a patch.
Holger
Joerg Friedrich wrote:
Joerg Friedrich schrieb am Sonntag, 08. Dezember 2002 um 10:34:54 +0100:Joerg Friedrich schrieb am Samstag, 07. Dezember 2002 um 15:45:55 +0100:Having read that the 'newstruct' drivers support volume-control on DVB-C Cards was one major reason to switch. But even with the new drivers the volume does not in- or decease when i.e. using vdr. What might be wrong? Or did I dream reading of this capability :-)Annotations: I own a Siemens DVB-C rev. 1.5. and I use the latest CVS-drivers. Can someone help debuging?Again answering myself: Found this in av7110.c: if (av7110->saa->device->subsystem_vendor == 0x110a) { if (i2c_writereg(av7110, 0x80, 0x0, 0x80)==1) { i2c_writereg(av7110, 0x80, 0x0, 0); printk("av7110: DVB-C analog module detected, " "initializing MSP3400\n"); ddelay(10); msp_writereg(av7110, 0x12, 0x0013, 0x0c00); msp_writereg(av7110, 0x12, 0x0000, 0x7f00); // loudspeaker + headphone msp_writereg(av7110, 0x12, 0x0008, 0x0220); // loudspeaker source msp_writereg(av7110, 0x12, 0x0004, 0x7f00); // loudspeaker volume msp_writereg(av7110, 0x12, 0x000a, 0x0220); // SCART 1 source msp_writereg(av7110, 0x12, 0x0007, 0x7f00); // SCART 1 volume msp_writereg(av7110, 0x12, 0x000d, 0x4800); // prescale SCART } // switch DVB SCART on outcom(av7110, COMTYPE_AUDIODAC, MainSwitch, 1, 0); outcom(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 1); //setgpio(av7110, 1, GPIO_OUTHI); // RGB on, //SCART pin 16 //setgpio(av7110, 3, GPIO_OUTLO); // SCARTpin 8 av7110->adac_type = DVB_ADAC_NONE; } and lspci reports: 00:0a.0 Class 0480: 1131:7146 (rev 01) Subsystem: 110a:0000 <-----------!!!! Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 14 Region 0: Memory at e1800000 (32-bit, non-prefetchable) [size=512] I think this means I cannot set any Volumelevel :-(((
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
