you have some serious hardware problems. Remove some of your cards, try other BIOS IRQ settings, try another slot for your DVB card.
If you have your kernel patched in any way or don't know where you got it from build a fresh one from the sources from http://www.kernel.org/
Holger
Auweiler, Rainer (RPS) wrote:
Hi,
with Redhat 8.0 and Siemens DVB-s it's not easy to watch TV !
After compiling the kernel 2.4.18-14 to have support for video4linux,
input core and event device a have now another fails with the card.
With 'make insmod' the following lines are shown:
[root@localhost driver]# make insmod
/usr/src/linux/scripts/pathdown.sh: line 4: TOPDIR: parameter null or not
set
DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules)
make[1]: Wechsel in das Verzeichnis Verzeichnis "/usr/src/linux-2.4.18-14"
make -r -f tmp_include_depends all
make[2]: Wechsel in das Verzeichnis Verzeichnis "/usr/src/linux-2.4.18-14"
make[2]: F�r das Target "all" gibt es nichts zu tun.
make[2]: Verlassen des Verzeichnisses Verzeichnis
"/usr/src/linux-2.4.18-14"
make -C /usr/local/src/DVB/driver CFLAGS="-D__KERNEL__
-I/usr/src/linux-2.4.18-
14/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2
-fno-strict-aliasing -fn
o-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2
-march=i586 -DM
ODULE" MAKING_MODULES=1 modules
make[2]: Wechsel in das Verzeichnis Verzeichnis
"/usr/local/src/DVB/driver"
ld -m elf_i386 -r -o dvb-core.o dmxdev.o dvb_demux.o dvb_net.o dvb_i2c.o
dvb_fil
ter.o dvb_frontend.o dvbdev.o compat.o dvb_ksyms.o
make -C av7110 modules
make[3]: Wechsel in das Verzeichnis Verzeichnis
"/usr/local/src/DVB/driver/av711
0"
ld -m elf_i386 -r -o dvb-ttpci.o saa7146_core.o saa7146_v4l.o av7110.o
av7110_ir
.o
make[3]: Verlassen des Verzeichnisses Verzeichnis
"/usr/local/src/DVB/driver/av7
110"
make -C frontends modules
make[3]: Wechsel in das Verzeichnis Verzeichnis
"/usr/local/src/DVB/driver/front
ends"
make[3]: F�r das Target "modules" gibt es nichts zu tun.
make[3]: Verlassen des Verzeichnisses Verzeichnis
"/usr/local/src/DVB/driver/fro
ntends"
make[2]: Verlassen des Verzeichnisses Verzeichnis
"/usr/local/src/DVB/driver"
make[1]: Verlassen des Verzeichnisses Verzeichnis
"/usr/src/linux-2.4.18-14"
( \
insmod videodev; \
\
insmod dvb-core.o dvb_shutdown_timeout=0; \
make -C frontends insmod; \
make -C av7110 insmod; \
)
Using /lib/modules/2.4.18-14/kernel/drivers/media/video/videodev.o
/lib/modules/2.4.18-14/kernel/drivers/media/video/videodev.o: init_module:
Input
/output error
Hint: insmod errors can be caused by incorrect module parameters,
including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
make[1]: Wechsel in das Verzeichnis Verzeichnis
"/usr/local/src/DVB/driver/
frontends"
insmod alps_bsru6.o; insmod alps_bsrv2.o; insmod alps_tdmb7.o;
insmod alps_tdlb7.o; insmod grundig_29504-401.o; insmod grundig_29504-491.o;
insmod ves1820.o;
make[1]: Verlassen des Verzeichnisses Verzeichnis
"/usr/local/src/DVB/driver/
frontends"
make[1]: Wechsel in das Verzeichnis Verzeichnis
"/usr/local/src/DVB/driver/
av7110"
insmod input; \
insmod evdev; \
insmod dvb-ttpci.o;
Using /lib/modules/2.4.18-14/kernel/drivers/input/input.o
/lib/modules/2.4.18-14/kernel/drivers/input/input.o: init_module: Device
or resource busy
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
Here are my interrupts and IO's:
[root@localhost root]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0220-022f : soundblaster
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
e000-e0ff : LSI Logic / Symbios Logic (formerly NCR) 53c810
e000-e07f : ncr53c8xx
e800-e80f : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
e800-e807 : ide0
e808-e80f : ide1
[root@localhost root]# cat /proc/irq
cat: /proc/irq: Ist ein Verzeichnis
[root@localhost root]# cat /proc/interrupts
CPU0
0: 479763 XT-PIC timer
1: 1071 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 67994 XT-PIC serial
5: 5251 XT-PIC soundblaster
6: 48 XT-PIC floppy
8: 1 XT-PIC rtc
10: 14 XT-PIC ncr53c8xx
12: 0 XT-PIC saa7146(0)
14: 87235 XT-PIC ide0
15: 29 XT-PIC ide1
NMI: 0
ERR: 0
What is to do with the card ?
Please help a newbie.
Rainer
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
