On Tue, Dec 10, 2002 at 03:01:24PM +0100, Bernd Muller-Rathgeber wrote: > I?m nearly shure that?s NOT the bandwidth, because the PID 252 I used only > has about 2Mbit and the 253 under 1Mbit. > And the same Error! > Bernd
Hmm then it is completely bugged firmware in DVB-S. They say they cannot relase it to public domain so not much people can fix the code, but that also ridicolous to have it crash at every time. In the meantime I completed multicast reception testing on Satelco (TT Budget clone) without the software bridge and vmware. After 4 hours of multicast reception, packets stopped arriving ifconfig and iptraf don't see any further increase in packet number or byte count. Machine didn't crash, though. Card is tuned to proper transponder, frequency, signal is strong and transponder is working. Sometimes this no-packets happens immediately as I 'make insmod'. The solution is to make rmmod; make insmod until the packets start arriving. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
