Hi! --- Alexandre CONRAD <[EMAIL PROTECTED]> schrieb:
> I haven't tryed locking to a TV channel yet. But > what's the command to > lock on a frequeny ? Do I have to give a PID for dvbtune is a good way to tune to a channel... tuxzap should work too... tuxzap comes with a handy graphics interface, while dvbtune is command line only... (tuxzap is included in the cvs tree, and a working dvbtune for the head cvs version is available at http://www.sourceforge.net/projects/dvbtools) > both audio and video ? Yes, if you want to see/hear audio and video :) > I'm pointing on Eutelsat W3. There are a very > few TV channels there. But Ow I know that Satellite :) Opensky runs there, doesn't it? > I'm been quicky looking around the drivers to > have the card to lock to a > signal, but it seems, I have to put in many > settings that I don't know. > Here are the settings I know : > > freq : 11,283 > Pol : V > Beam : EU > Analoogue / Digital : DVB > Audio MhZ FEC : 3/4 > Symb Rate : 27.5 in reality thats 27500 (or a reallllly slow transponder ;)) dvbtune -f 11283000 -p V -s 27500 then apps/scan/scan and then fill in to give: dvbtune -f 11283000 -p V -s 27500 -v <vpid> -a <apid> for example: dvbtune -f 11283000 -p V -s 27500 -v 2621 -a 2641 for M6 Swiss, if that's what you wanted to try :) > How can I know the audio and video PID if that > are the only settings I have to lock to the > channel ? And if I ever get it locked, will the 1) http://www.lyngsat.com/ or 2) Try the app in the apps/scan/ directory of the cvs tree of the driver... for me, it works fine... > image appear on TV ? Or do I need to start an > other command / application ? Well, it has been a while that I did that by hand, but in my understanding as soon as you tune to a tv channel with a valid video/audio pid it gets displayed on the tv out ... (I use vdr, thus those things happen automatically for me) __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Weihnachts-Eink�ufe ohne Stress! http://shopping.yahoo.de -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
