Klaudius Chlebosch wrote:
The SU1278 (and therefore your card) is supported when you apply the related patch posted a few days ago.Hi Holger,i have no idea which 'chip' you mean, but will try to describe the card: 1. out of the metal box: 1 IC Philips SAA 7146A H, CG0532.00, kt0222V3 2. on the metal box: SU1278/SH, 3112 297 12871, 214 HJ11 GA00136
Since it needs more work to avoid conflicts with the other stv0299 based frontends it's not yet in CVS.
3. inside the metal box nearly unreadable: STV0299B, T041007, T221L0124, MALTAyes, that's right. The frontend module is the SU1278, the Demodulator chip is the stv0299.
4. on the borad: TT2002.9, B2S1100, Rev.1.0
Can you indentify the frontend chip ? I suppose its the one in the metal box ( STV0299B ) ?
Holger
mfg -kc- Am Sonntag, 22. Dezember 2002 11:50 schrieben Sie:Hi Klaudius, Can you please tell me what frontend is soldered on this card? Holger Klaudius Chlebosch wrote:Hi List, i have problems getting my new Satelco DVB-S Standard PCI to work. It looks like a TT-Budget in a newer revision. I checked this out with the new driver from 1.11.2002 and 8.12.2002 from Klaus Schmiedingers hompage and a cvs checkout on 21.12.2002 => all the same. I had to modify the file saa7146_core.c to get the driver loaded. I added the following lines: static struct card_info ttbsk = { DVB_CARD_TT_BUDGET, "TT-Budget/WinTV-NOVA-S/KCH PCI" }; ... { PHILIPS_SAA7146, 0x13c2, 0x100f, CARD_INFO ttbsk }, Some info: lspci -v ... 00:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH: Unknown device 100f Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at de002000 (32-bit, non-prefetchable) [size=512] ... cat /proc/pci ... Bus 0, device 12, function 0: Class 0480: PCI device 1131:7146 (rev 1). IRQ 11. Master Capable. Latency=32. Min Gnt=15.Max Lat=38. Non-prefetchable 32 bit memory at 0xde002000 [0xde0021ff]. ... The enties in the log file ( with saa7146_debug=3 ): ... Dec 21 18:52:04 rascal kernel: Linux video capture interface: v1.00 Dec 21 18:52:05 rascal kernel: saa7146_init_module Dec 21 18:52:05 rascal kernel: saa7146_init_one() Dec 21 18:52:05 rascal kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-S/KCH PCI). Dec 21 18:52:05 rascal kernel: saa7146_core.o: ==> configure_saa7146 Dec 21 18:52:05 rascal kernel: saa7146: rvmalloc called, quant:2 Dec 21 18:52:05 rascal kernel: saa7146: alloc page tables Dec 21 18:52:05 rascal kernel: saa7146: clear RAM Dec 21 18:52:05 rascal kernel: saa7146: build page tables Dec 21 18:52:05 rascal kernel: saa7146: page tables built Dec 21 18:52:05 rascal kernel: saa7146_core.o: : bus:0, rev:1, mem:0xe0c3c000. Dec 21 18:52:05 rascal kernel: saa7146_core.o: master_xfer called, num:2 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_reset Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000400 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000400 Dec 21 18:52:05 rascal kernel: saa7146: i2c_reset: error_state detected, status:0x00000400 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000100 Dec 21 18:52:05 rascal kernel: saa7146: ==> writeout: 0xd000d1ec (before) (to:100) Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_busy_rise_and_fall Dec 21 18:52:05 rascal kernel: saa7146: i2c_busy_rise_and_fall; rise wait 5 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000101 Dec 21 18:52:05 rascal kernel: saa7146: i2c_busy_rise_and_fall; fall wait 100 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000101 Dec 21 18:52:05 rascal kernel: saa7146: i2c_busy_rise_and_fall; fall wait 99 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000100 ... the message that this card gets the IRQ thisanthat is missing, This might be the problem. I removed all other cards from the system and checked the other pci slots... still does not work. I bought another Satelco card in summer and it works without problems ( the board ist definitly different ) with the old driver and a FSC 1.3 in a sparate PC. I dont believe, that the PC is the problem, i tested the FSC and the working satelco card in the same PC, where the new satelco card does not work. The card works with win98 without problems. Maybe this is a new board revision, which is not fully supported ? Are thre any drive parms which might by helpfull ? Any idea is welcome... mfg -kc-
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
