Hi, On Sun, Dec 22, 2002 at 09:52:39PM +0100, Matthias Lautner wrote: > - szap -r zdf produces following result: > zapping to 'ZDF': > sat 0, frequency = 11954 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 0x0078 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 1f | signal b7e3 | snr cab9 | ber 0000ff13 | unc 00000000 | FE_HAS_LOCK > status 03 | signal b2c2 | snr cb3d | ber 0000ec00 | unc 00000000 | > status 03 | signal b682 | snr ca7d | ber 0000e600 | unc 00000000 | > status 03 | signal b548 | snr ca62 | ber 0000ff00 | unc 00000000 | > status 1f | signal b53d | snr ca20 | ber 0000b400 | unc 00000000 | FE_HAS_LOCK > status 1f | signal b2c0 | snr cafe | ber 0000bc00 | unc 00000000 | FE_HAS_LOCK
did you use the uni_stv0299 driver that I posted on Dec 08? The first version (Dec 04) did not work with input frequencies lower than 1.53 GHz because of a incorrect charge pump current setting (bits C0/C1 of the 4th byte written to the TSA5059). Peter -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
