On Wed, 2003-02-26 at 14:35, Sheetal_Pandey wrote: > Hi, > > I am using the Hauuppauge WinTV nexus-S card.I have tuned the antenna to > ASIASAT 2.I am trying to lock the card to European bouque but since I am > using the card for the first time ,I am not comfortable in giving the proper > values. > > I have another digital satellite receiver which is locked properly to > European bouque ,I mean that the signal is proper. > > The downlink freq is 4000 MHZ,fec 3/4,Symbol rate 28.125 Mbaud.I am using a > C band LNB with local oscillator freq 5150.Can somebody help in filling the > proper values.
I have this working - asiasat2 and European Bouquet. I am fairly sure the command line for eg. dvbstream is: (for eg for RTP) dvbstream -o -f 1150 -p H -I 1 -s 28125 517 700 (I can't confirm this at the moment as vdr is currently running) The problem is that the dvb stuff assumes Ku band LNB where you tune to L = freq - LOF. With c-band L = LOF - freq. (L is the frequency on the cable from the LNB to the card). Luckily most of the tools accept L band frequences directly. So to tune to the European Bouquet you need to tune to 1150 (ie 5150 - 4000). In VDR I have set the LOF to 0 and I put 1150 in the channels.conf. I think that VDR could be modified to accept the real frequencies. All that is needed is to put freq=abs(freq). (If freq - LOF = L, then LOF - freq = -L. By putting the abs in we get the correct frequency) I must add that I have not tried this modification yet. (What do other think? Klus?) > > Regards, > Sheetal Pandey > > > ************************************************************************** > This email (including any attachments) is intended for the sole use of the > intended recipient/s and may contain material that is CONFIDENTIAL AND > PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or > distribution or forwarding of any or all of the contents in this message is > STRICTLY PROHIBITED. If you are not the intended recipient, please contact > the sender by email and delete all copies; your cooperation in this regard > is appreciated. > ************************************************************************** > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
