Am Mit, 2003-03-19 um 22.34 schrieb Otto J. Makela: > On Wed, Mar 19, 2003 at 19:51:49 +0100, Andreas Schwenk wrote: > > > I connected my Hauppauge DVB-C with a homebrown SCART-Cable to my TV. > > First, everything worked fine, I have a brilliant picture. > > But now I can't switch back to other channels of my TV. I hear Sound > > from my other TV-Channels, but I see only a drifting Picture (from upper > > left to lower right) from my DVB-Card. > > Check the pins 8 and 16 of the SCART connector on the cable. These are > what control if the TV switches to show that RGB signal or not. > Maybe there is a problem with either of this pins, signal on all the time? > > The fact that the picture is drifting suggests your card output signal > isn't quite what the television is expecting, it doesn't synch up? > --
Pin 8 is not connected, what its purpose ? I think the Sync comes from Pin 20. The Problem is that my DVB-Card always has always a Signal on Pin 16. When I change a Channel on my TV, Pin 20 is cut off, but the RGB-Pins still interference my TV-Picture. Although I switched on my TV. Perhaps its a problem of my TV. It's not the newest. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
