The path refered to in theis mail is for the driver in the 2.5.6[0-5] kernel.
Monchi -- On Thu, Mar 20, 2003 at 04:59:23PM +0100, [EMAIL PROTECTED] wrote: > Hello Lothar, > > I hereby send you a patch to make the saa7146 driver compile as built in driver. > I got it to decode mpeg with mplayer, the only problem I have gotton is that I my > board does not have the analogue module on it, so it will not tune anything but > analog channels. I have also found the pdf booklet ( I can mail it to you if you > want. ) But here is a patch to fix the driver. > > > --- linux/drivers/media/dvb/av7110/saa7146_core.c 2003-03-17 22:44:22.000000000 > +0100 > +++ linux/drivers/media/dvb/av7110/saa7146_core.c 2003-03-19 15:26:24.000000000 > +0100 > @@ -908,7 +908,7 @@ > .name = "saa7146", > .id_table = saa7146_pci_tbl, > .probe = saa7146_init_one, > - .remove = saa7146_remove_one, > + .remove = __devexit_p(saa7146_remove_one), > .suspend = saa7146_suspend, > .resume = saa7146_resume, > }; > > I will also attache it. > > Monchi. > -- > On Mon, Mar 03, 2003 at 07:22:05PM +0100, Lothar Liebig wrote: > > Hello Monchi, > > > > sorry, haven't tested it any further, too much work and private stuff. Maybe > > there are a few things I havn't tried yet: > > > > Install original Kernel Source ( /usr/src/linux/ is a link to the SuSE > > Kernel, so you should remove the link before installing the Kernel - look at > > Suse SDB or Google to be sure) > > > > zcat /proc/config.gz > .config (to save the actual configuration) > > > > make oldconfig (maybe there are a few different things to be taken car of) > > > > make clean dep bzImage modules modules_install > > > > you're on your own to install the new compiled kernel with grub or lilo. > > Hav'nt done that for a while (lilo) or never (grub) > > > > Remember: Do not overwrite your original Kernel!!! > > > > check everything twice and off you go! > > > > Reason: > > The SuSE kernel is heavily modified, whereas maybe not conform to what > > linux-tv expects. > > > > You could try the beta kernel too. > > > > Did You try the linux-tv installation from the SuSE Disks? It showed a line > > like "Convergence (c) 1999" (not sure) on the TV which slowly disappeared. > > This was the only thing I could see. > > > > Where did you buy the card (mine I bought thru ebay from Siemens, Kiel)? > > > > Hope you will get it to work and please mail if there is any progress! > > > > Take care > > > > Lothar > > > > > > Am Montag, 3. M?rz 2003 10:31 hat mir [EMAIL PROTECTED] geschrieben: > > > Hello lothar, > > > > > > I am just sending you this message to ask you if you got any replies, I > > > have the same card and can't seem to get it to work either. > > > > > > Monchi. > > > -- > > > > > > >hi, > > > > > > > >trying to get this card to work with vdr, I managed to compile > > > >linux-12-08-2002 without errors (as far as I can tell). make insmod does > > > > show this in /var/log/messages: > > > > > > > >Jan 6 06:12:38 linux kernel: Linux video capture interface: v1.00 > > > >Jan 6 06:12:41 linux kernel: DVB: registering new adapter > > > >(Siemens/Technotrend/Hauppauge PCI rev1.3). > > > >Jan 6 06:12:41 linux kernel: PCI: Found IRQ 10 for device 00:0f.0 > > > >Jan 6 06:12:43 linux kernel: ves1820.c: unknown PLL, please report to > > > ><[EMAIL PROTECTED]>!! > > > >Jan 6 06:12:45 linux kernel: DVB: AV7111(0) - firm f0240009, rtsl > > > > b0250018, vid 71010068, app 00012502 > > > > > > > >which I wanted to report as requested. If there is something I could do > > > > about it by myself (change something in 'ves1820.c', or give more > > > > information, pls send me a personal mail, 'cause I'm not subscribed to > > > > the list (yet)! > > > > > > > >Thx a lot > > > > > > > >Lothar > > > > > > > > > > > >PS: here's some information about the DVB-C card (from the net, not > > > > verified on the card itself) HTH > > > > > > > > chips: saa7146ah, TMX320av7111gfn, cy7c024av, ves1820, tda9819, atmel > > > > 24c16 tuner: CD1516/IH > > > >pcb: BS 03601172 DVB > > > > > > > > > > > > > > > >-- > > > >Info: > > > >To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe > > > > linux-dvb" as subject. > > > --- linux/drivers/media/dvb/av7110/saa7146_core.c 2003-03-17 22:44:22.000000000 > +0100 > +++ linux/drivers/media/dvb/av7110/saa7146_core.c 2003-03-19 15:26:24.000000000 > +0100 > @@ -908,7 +908,7 @@ > .name = "saa7146", > .id_table = saa7146_pci_tbl, > .probe = saa7146_init_one, > - .remove = saa7146_remove_one, > + .remove = __devexit_p(saa7146_remove_one), > .suspend = saa7146_suspend, > .resume = saa7146_resume, > }; -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
