I have a little problem.
I try your solution to play the mpeg stream, but not work.
I use the 'modprobe dvb-bt8xx' command for load the bt8xx dvb drivers and i call the './insmod load' in the dvb-kernel source dir, but after i successfully load the modules, i don't hear a 'click' from my machine house. This little click sound every hear on windows, or if i'm using the old 'pinnacle experimental' driver ... How to "turn to on" my dvb card? :)
Thanx
Demeter Tibor
Alex Woods wrote:
I'm install the dvb-kernel driver for my pinnacle pctv sat card. This card
based on bt878 chip. I successfully compile the driver, load the
modules, but i don't know how to watching the tv channels ?
I'm not exactly sure of the tuning method for satelite tuners, but you probably want to take a look at szap from the 1.0.0-pre2 release or tuxzap from http://metzlerbros.org/dvb/index.html. This should allow you to tune the card to a channel.
You can then use a command like this to watch the video:
cat /dev/dvb/adapter0/dvr0 | ts2ps 600 601 | mplayer -
The ts2ps util is part of the dvb-mpegtools package, also available from http://metzlerbros.org/dvb/index.html. The two numbers are the video and audio pids of the channel that you want to watch.
Cheers, Alex
-- Demeter Tibor
Net-Working Szolg�ltat� �s Kereskedelmi Bt. 2700 Cegl�d, R�k�cz �t 56/A C lh. 1 em. 5 Tel.: +36 70/318-9705 Fax: +36 53/310-030 E-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> http://www.net-working.hu
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
