[EMAIL PROTECTED] tmp]# cat broken.ts | TScheckcontinuity New pid (600) found New pid (601) found Discontinuity found, pid 600, frame 88 15 0 15 14 13 Discontinuity found, pid 601, frame 98 11 2 1 0 15 Discontinuity found, pid 600, frame 504 1 7 6 5 4 Discontinuity found, pid 601, frame 519 3 1 0 15 14 Discontinuity found, pid 600, frame 1058 8 12 11 10 9 Discontinuity found, pid 601, frame 1079 2 0 15 14 13 Discontinuity found, pid 600, frame 1887 3 6 5 4 3 Discontinuity found, pid 600, frame 2439 7 12 11 10 9 Discontinuity found, pid 601, frame 2451 0 13 12 11 10 and so on ...
I don't know if it'll help, but try to setup also another parameters like -qam X DVB-T modulation - 16, 32, 64 (default), 128 or 256 -gi N DVB-T guard interval 1_N (N=32 (default), 16, 8 or 4) -cr N DVB-T code rate. N=AUTO, 1_2, 2_3 (default), 3_4, 5_6, 7_8 -bw N DVB-T bandwidth (Mhz) - N=6, 7 or 8 (default) -tm N DVB-T transmission mode - N=2 (default) or 8
And what shows tzap? Try configure ~/.tzap/channels.conf and run following on separate consoles: tzap -r CHANNEL cat /dev/dvb/adapter0/dvr0 | xine -
Michal
--[ UxBoD ]-- wrote:
Okay I have upload some stream using :
dvbstream -f 641833 -v 600 -a 601 -o > /tmp/broken.ts
it is at :
http://www.splatnix.net/broken.ts
regards
Phil
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
