> From: Stefan Norberg [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 10, 2003 11:16 PM > To: [EMAIL PROTECTED] > Subject: [linux-dvb] Re: hw_sections=0 causes disrupted recordings > > > I have two cards (DVB-C and DVB-T - I've had two DVB-C cards too) with > hw_sections=0 and I do not have any problems with recording > specifically. > I 'only' experience general unstability with two cards. Often > the screen > just stays blank on one of the cards after a while. Need to reload > driver to resolve problems. When the system is ok, recordings are > perfect.
to all - please be more specific about the hardware, driver/firmware and vdr (modded, any plugins?)version you are talking about 2 full dvb-s with driver 24.05.03 and hw_sections=0, i have no problems, with the latest driver (i.e. 08.06.03) and hw_sections=0 i do have the strange damaged recordings (hw_sections=1 is ok), tested the recordings with pvastrumento and there where frames missing (=no replay problem) all tested with vdr 1.2.1 so i sill use the "older" driver/firmware (i never had replay problems with that, but only recording commen german stations) -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
