Since the default for hw_sections in the driver is now '0' I'd like to point out that this will not work together with the '-icam' version of the firmware (see DVB/driver/av7110/README-firmware).
This is not a bug, but a feature. The -icam firmware needs to scan the section data for the CA_PMT values in order to control the CAM, but it can't do this if section filtering is done by the driver (at least that's my understanding). So, those who need to use the -icam firmware because their CAM doesn't work with the default "link layer" firmware, please make sure you load the driver with hw_sections=1. Note that this is only relevant for CAM users - if you don't have a CAM, or your CAM works with the default firmware, you don't need to worry about this. @Holger: is this correct? Should we add a note about this to README-firmware? Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: [EMAIL PROTECTED] D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
