Hi, I'm trying to build a digital video recorder with vdr, but I have problems getting my dvb-s card working.
you can find the output of the `scan' program at http://wulf.eu.org/scan.out, it's too much to paste here. vdr seems not to receive any data at all from my card. Unfortunately the card has no video out. I've already put another device (external settop box) to the sat cable and this works, so I think that it's a driver issue. Hope you can help me :) some kernel messages: Linux video capture interface: v1.00 saa7146: register extension 'budget dvb'. saa7146: register extension 'budget dvb /w video in'. saa7146: register extension 'dvb'. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. PCI: Found IRQ 11 for device 01:09.0 saa7146_core: found saa7146 @ mem d8853c00 (revision 1, irq 11) (0x13c2,0x100f). DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI). stv0299.c: setup for tuner SU1278/SH DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... ttpci_eeprom_read_encodedMAC TT-Budget/WinTV-NOVA-CI PCI adapter 0 has MAC addr = 00:d0:5c:6b:43:16 encoded MAC was e4:13:fd:b1:c4:e0 saa7146: register extension 'budget dvb /w video in'. lspci -vvv for this card: 01:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH: Unknown device 100f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ff8ffc00 (32-bit, non-prefetchable) [size=512] Joern "Wulf" Heissler -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
