This is a cut of my dmesg:
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.104 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 02:04.0, irq: 21, latency: 32, mmio: 0xe0000000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: BT878(Pinnacle PCTV Sat) [card=94,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=-1
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 02:04.1, irq: 21, latency: 32, memory: 0xe0001000
DVB: registering new adapter (Pinnacle PCTV DVB-S).
cx24110: attaching cx24106
DVB: registering frontend 0:0 (Conexant cx24110/cx24106 frontend)...
I'm don't know why not work me, but i need to work
Anyone know what the problem????
Nico wrote:
Hi,
I don't have that model, mine is a Hauppage Wintv nova-s.
what does dmesg say? It should list a frontend
On Thu, 10 Jul 2003, Demeter Tibor wrote:
Hella!
no.... i'm not see anything....
[EMAIL PROTECTED] silence]$ dvbstream -f 12480 -p V -s 27500 -o -ps 1791 1792 | mplayer - dvbstream v0.4pre3 - (C) Dave Chapman 2001 Released under the GPL. Latest version available from http://www.linuxstb.org/ Using DVB card "Conexant cx24110/cx24106 frontend" tuning DVB-S to L-Band:1, Pol:V Srate=27500000, 22kHz=off Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/local/share/locale
MPlayer 0.90rc5-3.2.2 (C) 2000-2003 Arpad Gereoffy (see DOCS)
CPU: Intel (Family: 8, Stepping: 4) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /home/silence/.mplayer/config Reading /home/silence/.mplayer/codecs.conf: 50 audio & 136 video codecs Font /home/silence/.mplayer/font/font.desc loaded successfully! (206 chars) Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Using usleep() timing Input config file /home/silence/.mplayer/input.conf parsed : 52 binds
Playing - Reading from stdin... polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_TIMEDOUT FE_HAS_CARRIER Not able to lock to the signal on the given frequency Falling back on trying to parse playlist -... ============ Sorry, this file format is not recognized/supported ============= === If this file is an AVI, ASF or MPEG stream, please contact the author! ===
Exiting... (End of file) [EMAIL PROTECTED] silence]$
This is the output of your command.
But i think this is a driver problem, but i'm not hear the "Init click":)) my lsmod output:
Module Size Used by Tainted: P dvb-bt8xx 3904 0 (unused) bt878 5792 0 [dvb-bt8xx] cx24110 6600 1 dvb-core 51788 0 [dvb-bt8xx cx24110] bttv 83776 0 [dvb-bt8xx] video-buf 15900 0 (unused) v4l2-common 3872 0 (unused) v4l1-compat 13476 0 (unused) videodev 8320 2 [bttv] i2c-algo-bit 8808 1 [bttv]
you have some differents in your lsmod output? and you hear the "click" when load the modules ?
Thank you:
Demeter Tibor
Nico wrote:
what command did you run?
if you have Hotbird on the first (or only) lnb try this:
dvbstream -f 11766 -p V -s 27500 -o -ps 160 80 | mplayer -
if you have Astra
dvbstream -f 12480 -p V -s 27500 -o -ps 1791 1792 | mplayer -
do you seen anything?
this link will help you to test the frequencies :
http://www.lyngsat.com/europe.shtml
On Thu, 10 Jul 2003, Demeter Tibor wrote:
Thanks Nico ! I'm download the dvbstream cvs from sourceforge and th comlpie without any problem, but not work...
dvbstream v0.4pre3 - (C) Dave Chapman 2001 Released under the GPL. Latest version available from http://www.linuxstb.org/ Using DVB card "Conexant cx24110/cx24106 frontend" tuning DVB-S to L-Band:1, Pol:V Srate=22000000, 22kHz=off Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/local/share/locale
MPlayer 0.90rc5-3.2.2 (C) 2000-2003 Arpad Gereoffy (see DOCS)
CPU: Intel (Family: 8, Stepping: 4) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /home/silence/.mplayer/config Reading /home/silence/.mplayer/codecs.conf: 50 audio & 136 video codecs Font /home/silence/.mplayer/font/font.desc loaded successfully! (206 chars) Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Using usleep() timing Input config file /home/silence/.mplayer/input.conf parsed : 52 binds
Playing - Reading from stdin... Cache fill: 0.00% (0 bytes) polling.... Cache fill: 0.00% (0 bytes) Getting frontend event FE_STATUS: FE_TIMEDOUT Not able to lock to the signal on the given frequency Cache fill: 0.00% (0 bytes)
I think the problem with the driver.... After i load the modules i'm not hear the classical "click" sound form my pc case.... I'm every hear this sound if i using the windows and windows driver.... What the problem?
Thank you
Demeter Tibor
Nico wrote:
You need dvbstream 0.4-pre3 from sourceforge cvs
http://sourceforge.net/projects/dvbtools/
and if you have a dual-lnb dish you also need a diseqc patch for dvbstream that I posted to this list months ago
On Thu, 10 Jul 2003, Demeter Tibor wrote:
Hello Andr� !
Thank you the fast reply, but i'm not found the "watch_dvb" on this location. Please write me the where found this script. I try to complie the szap from the DVB project, but i have some errors.
[EMAIL PROTECTED] szap]# ./szap -n 066 reading channels from file '/root/.szap/channels.conf' zapping to 'LA CINQUIEME': sat 0, frequency = 12207 MHz V, symbolrate 27500000, vpid = 0x00a0, apid = 0x0050 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal 005a | snr 0000 | ber 00000c46 | unc 0000ffff | status 00 | signal 0057 | snr 0000 | ber 00002932 | unc 0000ffff | status 00 | signal 0057 | snr 0000 | ber 000045b4 | unc 0000ffff |
... and so to...
The dvbstream not compile with this errors:
[EMAIL PROTECTED] dvbstream-0.4pre2]# make gcc -I ../dvb-kernel/linux/include/linux/dvb/ -c -o tune.o tune.c tune.c: In function `tune_it': tune.c:20: `FrontendStatus' undeclared (first use in this function) tune.c:20: (Each undeclared identifier is reported only once tune.c:20: for each function it appears in.) tune.c:20: parse error before "festatus" tune.c:21: `FrontendEvent' undeclared (first use in this function) tune.c:22: `FrontendParameters' undeclared (first use in this function) tune.c:23: `secToneMode' undeclared (first use in this function) tune.c:24: `secVoltage' undeclared (first use in this function) tune.c:28: `feparams' undeclared (first use in this function) tune.c:40: `tone' undeclared (first use in this function) tune.c:48: `voltage' undeclared (first use in this function) tune.c:56: `SEC_SET_TONE' undeclared (first use in this function) tune.c:60: `SEC_SET_VOLTAGE' undeclared (first use in this function) tune.c:75: `event' undeclared (first use in this function) tune.c:85: `FE_UNEXPECTED_EV' undeclared (first use in this function) tune.c:87: `FE_COMPLETION_EV' undeclared (first use in this function) tune.c:89: `FE_FAILURE_EV' undeclared (first use in this function) tune.c:119: `festatus' undeclared (first use in this function) tune.c:123: `FE_HAS_POWER' undeclared (first use in this function) tune.c:125: `FE_SPECTRUM_INV' undeclared (first use in this function) tune.c:130: `FE_TUNER_HAS_LOCK' undeclared (first use in this function) make: *** [tune.o] Error 1
How to work for you? I use the dvb-kernel, and not complie with this dirver... But, with the original "DVB" driverset complie without any problem, but this driver not supported my card...
Please help me ! Thanx
Demeter Tibor
-- Demeter Tibor
Net-Working Szolg�ltat� �s Kereskedelmi Bt. 2700 Cegl�d, R�k�cz �t 56/A C lh. 1 em. 5 Tel.: +36 70/318-9705 Fax: +36 53/310-030 E-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> http://www.net-working.hu
-- Demeter Tibor
Net-Working Szolg�ltat� �s Kereskedelmi Bt. 2700 Cegl�d, R�k�cz �t 56/A C lh. 1 em. 5 Tel.: +36 70/318-9705 Fax: +36 53/310-030 E-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> http://www.net-working.hu
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
