[linux-dvb] Re: bt8xx card problem continue

Demeter Tibor Fri, 11 Jul 2003 06:28:32 -0700

[EMAIL PROTECTED] szap]# dvbstream -o -ps 3031 3032 | mplayer -
dvbstream v0.4pre3 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Output to stdout
Streaming 2 streams
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale

CPU: Intel  (Family: 8, Stepping: 4)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /root/.mplayer/config Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory Reading /usr/local/etc/mplayer/codecs.conf: 50 audio & 136 video codecs font: can't open file: /root/.mplayer/font/font.desc font: can't open file: /usr/local/share/mplayer/font/font.desc Using Linux hardware RTC timing (1024Hz). Can't open input config file /root/.mplayer/input.conf : No such file or directory Can't open input config file /usr/local/etc/mplayer/input.conf : No such file or directory Falling back on default (hardcoded) input config

Playing -
Reading from stdin...

and at this point mplayer wait and wait .....

any tipp?

Demeter Tibor

Nico wrote:

On Fri, 11 Jul 2003, Demeter Tibor wrote:

Hi all !

I have a pinnacle pctv sat card and this card not work me.
I write some mail to this list, and my some problem resolved (thanks for
nico,paul and some people) but the card contiune to not working...

so,

redhat 9
kernel 2.4.21 with the i2c-if-0.9.4 patch (but i'm think the bttv newest
than 0.9.4 in the 2.4.21, but the patch work)
2003.07.09 CVS dvb-kernel

The driver complie and loadable without any problem

I'm get the dvbstream cvs from sourceforge and complie without any problem

I'm create any devices by the "makedev.napi" script from the DVB/drivers

This is the dvbstream output

[EMAIL PROTECTED] bin]# dvbstream -o -ps -f 12699 -p v -s 22000 3031 3032
> test.mpg
dvbstream v0.4pre3 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Using DVB card "Conexant cx24110/cx24106 frontend"
tuning DVB-S to L-Band:1, Pol:V Srate=22000000, 22kHz=off
polling....
Getting frontend event
FE_STATUS: FE_TIMEDOUT
Not able to lock to the signal on the given frequency

I try to szap but not working:


reading channels from file '/root/.szap/channels.conf'
zapping to 'LibertyTV.com':
sat 0, frequency = 12611 MHz V, symbolrate 22000000, vpid = 0x03ad, apid
= 0x03ae
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 04 | signal 001b | snr 0000 | ber 00000b19 | unc 0000ffff |
status 1f | signal 001b | snr 0000 | ber 00000cbf | unc 0000ffff |
FE_HAS_LOCK
status 1f | signal 001b | snr 0000 | ber 00000cc1 | unc 0000ffff |
FE_HAS_LOCK
status 1f | signal 001b | snr 0000 | ber 00000cc8 | unc 0000ffff |
FE_HAS_LOCK
status 1f | signal 001b | snr 0000 | ber 00000cc8 | unc 0000ffff |
FE_HAS_LOCK
status 1f | signal 001a | snr 0000 | ber 00000cc8 | unc 0000ffff |


FE_HAS_LOCK means I HAVE THE LOCK ON THE FREQUENCY, so your card is
successfully tuned;

now you should be able run

dvbstream -o -ps 3031 3032 | mplayer -

and see some output, admitting that program is not scrambled


--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as 
subject.

[linux-dvb] Re: bt8xx card problem continue

Reply via email to